BRUEL & KJAER ACCELEROMETER Model 4507 002 With ENDEVCO 3090CM12 Cable

Description: This auction is for a BRUEL & KJAER Titanium Accelerometer model 4507 002 with an ENDEVCO model 3090CM12 Cable. We have several for sale if you need more then one contact us.The sensor and cable are in excellent physical and electrical condition. (Perhaps unused). Please refer to the listing photos. Tech Information on B&K 4507 002: Performance Specs CCLD Accelerometer Type 4507 002 Weight 4.8 grams/ 0.17 oz Voltage Sensitivity mV/ms-2 100+/- 10% (at 159.2 Hz, 4 mA supply current) Frequency Range Amplitude (+/-10%) 0.4 to 6000Hz Phase (+/-5%) 2 to 5000Hz Mounted Resonance Frequency 18KHz Max. Transverse Sensitivity (at 30 Hz, 100 ms?2) <5% Transverse Resonance Frequency >18KHz Max Operational Continuous Sinusoidal Acceleration (± peak) -0.07kms-2 or 7g TEDS yes Electrical Specs CCLD Accelerometer Type 4507 002 Bias Voltage (at full temp. and curr. range) 13Volts +/-2 Power Supply Constant Current 2-20mA Unloaded supply voltage 24-30Volts Output Impedance 30 ohms Start-up time (to final bias ±10%) <5 Seconds Residual Noise (inherent rms broadband noise in the specified frequency) <150uV ug<150 Noise (spectral) mmsv2 /vHz(vg/vHz) 10Hz 0.08 (8) 100Hz 0.02 (2) 1KHz 0.01 (1) Environmental Specs CCLD Accelerometer Type 4507 002 Operating Temperature Range -54 to +100C -65 to +212F Temperature Coefficient of Sensitivity 0.18 %/C Max. Non-destructive Shock (± peak) 50kms-2 or 5000g Mechanical Specs CCLD Accelerometer Type 4507 002 Case Material Titanium ASTM Grade 2 Piezoelectric Sensing Element PZ 27 Construction ThetaShear Sealing Hermetic Side Connector Side 10-32 UNF-2A Dimensions (excluding connector) 10mm × 10mm × 10mm (0.4? × 0.4? × 0.4?) Applications: The 4507 Titanium accelerometers are specifically designed to withstand rough environments. A combination of high sensitivity, low mass and small physical dimensions makes them ideal for modal analysis on large, composite structures that require multiple measurement points, such as ground vehicles, aircraft and satellites. The accelerometers are easy to handle, reliable, and rugged enough for use in a wide range of environments. They can be calibrated quickly, and they have a low sensitivity to temperature transients, which is advantageous when it comes to making measurements at low frequencies ENDEVCO 3090CM12 coaxial cable specifications The following specifications are typical and taken at approximately 75°F (24°C) unless otherwise noted. Characteristics Units 3090CM12 Connectors Connector 1 in (mm) 10-32 NF 0.250 dia. (6.35) Dielectric material Glass Pin material 304L stainless steel Connector material 304 stainless steel Strain relief material Fluorosilicone rubber Torque (10-32 connector) in-lb (Nm) Finger tight to 1.5 (0.17 ) Weight gms 1.65 Connector 2 BNC, bayonet, straight plug, male Dielectric PTFE Teflon Pin material Brass, gold plated Connector material Brass, silver finish Cable Color (3) Red Outer Jacket PTFE Teflon®, wrapped and fused Center conductor Stranded Conductor material Silver plated copper Conductor size AWG 30 Primary Insulation Teflon® Cable type Coaxial Diameter in (mm) 0.08 (2.032) Shield material Silver plated copper Cable weight gms/ft 3.3 Bend radius in (mm) 0.850 (21.59) Raw cable part number 26108 Environmental Minimum temperature, cable and 10-32 connector °F (°C) -432 (-254) Maximum temperature, cable and 10-32 connector °F (°C) 500 (260) Minimum temperature, BNC plug °F (°C) -85 (-65) Maximum temperature, BNC plug °F (°C) 320 (165) Pin pullout (10-32) lbs (kg) 33 (15 ) Cable pull strength lbs (kg) >20 (9) Shock g peak 10,000 Random vibration g rms 20.7 Sinusoidal vibration (2) g peak 1,000 Electrical Noise (1) pC pk-pk 1.5 Capacitance (1) Pf/ft. 36 Insulation resistance (at 100 Vdc) (1) G >50 Bend radius in (mm) 0.85 (21.6) Raw cable PN 26108 We have done our best too list this items specifications and condition accurately. But always defer to the listing photos. Concerning product details and specifications please refer to the manufactures website, or other online sources for more information such as data sheets, manuals, firmware updates, software, or reviews. And with unit specific questions on condition, options, and software/firmware revisions if not clear in the listing photos and description feel free to contact me. The ENDEVCO 3090CM12 coaxial cable assembly is a high reliability cable designed for use with charge-mode piezoelectric accelerometers. The cable enjoys a long history of reliable use spanning from laboratory use to flight-testing. The raw cable, 10-32 connector and pin assemblies are made in-house to ensure the highest quality product available, making this cable assembly unique to the industry. All cables are 100% tested?for noise thus making them ?true low-noise? cables. The actual cable capacitance is measured and recorded on the package; an important parameter for long cable runs. The 10-32 connector employs a fused glass dielectric for maximum reliability and moisture protection and its stainless steel connector pin is welded to the cable?s center conductor strands for maximum pull-strength and minimum noise. The BNC termination is compatible with most DAQs, and signal conditioners. * * * CALL: +1.303.554.0307 WITH ANY QUESTIONS * * *SEE OUR EXCELLENT eBay FEEDBACK & BUY WITH CONFIDENCE We feel the listing price is already very good considering the item and condition, but if this item has been listed for a few week we are always willing to entertain a reasonable offer. The last few listing photos are of our lab, sorry not included in the auction. Please read all of the Warranty terms and Shipping requirements carefully before bidding Warranty USA: We want you to be happy with your purchase and we will always do our very best to resolve any customer problems however our official policy is as follows: (Buyer inside continental USA only - international buyer read our international terms). 1. This item is sold with a 30 Day Satisfaction Guarantee. So bid with confidence. If you have a need to contact me after the sale, my direct contact information will be included with the invoice inside the box. All returns must be arranged within 30 days of receipt of the item. We will extend that period if needed to send the item for calibration with the manufacturer or A2AL accredited lab. We will be glad to ship directly for calibration if you wish. So bid with confidence. Please if you are experience buyers remorse, on experiencing an issue contact us as soon as possible. 2. We have never had a problem - but please respect our policy - Important - Our warranty is VOID with absolutely no returns if the tamper proof seals are damaged of removed. (In those situations returns must be approved by Ascent Concepts and Technology through eBay email). Further during inspection, cleaning, and testing all internal and external parts are documented in detail. This is for your protection as much as ours and allows us to stand behind any real issue. Board swapping, high grading and other forms of return fraud will be dealt with harshly. 3. Obviously the item must be returned as shipped, with all accessories, manuals, and original manufactures packing (Where applicable). Please do you best packing the return. The purchaser is responsible for damage during return shipping resulting from improperly packaging. 4. Refunds will include the purchase price and shipping if we have made a listing error, the equipment does not work as described, or failed during the return period....But we think it is only fair the customer be responsible for all shipping charges on returns in the case of buyer remorse? 5. Lastly, due to the delicate nature of test and measurement equipment there will be no refund for items electrically or physically damaged from improper use/operator abuse. (Overloaded input and such) Our listings show most instruments running in a lab environment to demonstrate proper function. Remember - You Matter......Until you multiply yourself times the speed of light squared.....Then You Energy Payments: 1. We prefer PayPal. 2. Ascent Concepts and Technology accepts VISA and MC. 3. We may accept a P.O from Institutions, Dealers, and Companies that we approve prior to bidding. Net 10 preferred. Payment must be made within four business days (Monday-Friday excluding holidays) of the close of the auction unless you have made special arrangements with us. Bidders with no feedback or less than 80% positive feedback must contact us through the eBay email system before placing a bid. We will reply through the same system, documenting that you have been approved to bid. If you do not follow these procedures, your bid will be cancelled. All other bidders; bid with confidence. Tax: Sales Tax is charged, billed, and collected by eBay, so if you are tax exempt, you need to tell them. I have absolutely nothing to do with it and I cannot refund the sales tax that eBay is obliged to collect for the various States. In the rare case we allow an International Buyers they are responsible for all Duties, Vat, Customs, and any other Fees related to this sale. "Peace is not the absence of violence, but the presence of justice" MLK & Einstein Shipping: 1. We will make every effort to ship your item within 24 hours of receipt of your cleared payment on business days (Monday thru Friday excluding holidays). ? 2. On high dollar or items difficult to package it may take as much as five business days ? 3. We ship with FedEx and USPS only.We will be glad to ship using the purchaser's shipping account. For rate research, our shipping address is Boulder CO 80303. ? 4. Many of our auctions have a free or set packing and shipping fee.This makes the transaction easier and allows the purchaser to send payment at once without having to wait for a shipping total. Please consider the total with shipping when bidding on items without free shipping. Our Company and Philosophy: We Want your purchase to exceed your expectations. The first question is whether this is the right piece of equipment to meet your needs, Feel free to ask for our expertise, we have no problem steering you to another eBay seller, dealer, or manufacturer who has exactly what you are looking. The second question is condition. In this case "As Is" "No Returns". We have done our best to describe the issues, but please ask questions before you bid. We view others with a passion for Test and Measurement as part of a very special community whether a hobbyist or Noble Price level Physicist and will do our very best to treat any buyer the way we would like to be treated ourselves. All we ask is you treat us fairly and we will always go the extra mile even beyond eBays requirements and our stated warranty to take care of any legitimate issue - whether a performance issue or simply not the instrument that best serves your needs. Again we encourage you to contact us before you bid with any question on the capabilities, condition, and perhaps most importantly if it is the right product to meet your specific needs. About Us: Ascent Concepts and Technology (ACT) and our new Phoenix Metrology Research Group is a few scientists and engineers involved in R&D of Time and Frequency as well as Voltage Metrology Instruments intended to bridge the ever widening gap between Quantum Standards and current State of the Art calibration and measurement instruments. Basically a bunch of Test and Measurement nerds. We find buying and selling equipment a nice compliment to our R&D work. "To be is to do" Socrates. "To do is to be" Jean-Paul Sartre. "Do be do be do" Frank Sinatra.......Proof of de-evolution? International Buyers: Our official policy is no international buyers, If we make an exception please be aware buyers outside the continental USA are purchasing strictly "As Is" "No Returns" with no warranty expressed or implied International buyers must arrange their own shipping. Please contact us before bidding. International Buyers are responsible for all Duties, Vat, Customs, and any other Fees related to this sale. More detail on terms above: For any buyers outside the USA ACT will be glad to spend additional time testing before shipping, but we strongly encourage shipping to the Manufacturer or accredited calibration lab of the customers choice and expense (in the USA) to insure proper function before forwarding internationally. Obviously the customer is responsible for shipping from the testing/calibration lab and any costs related to testing or calibration. If the item fails testing we will pay return shipping from the calibration lab and provide a full refund of your purchase. Finally - To plagiarize Mark Twain "I apologize for such a long Listing - I didn't have time to write a short one." Please feel free to EMAIL Tom Knox or CALL: +1.303.554.0307 with any questions.

Price: 299.99 USD

Location: Boulder, Colorado

End Time: 2024-11-10T00:31:36.000Z

Shipping Cost: 0 USD