BMW 42lb 450cc Fuel Injectors E36 M3 M5 m50 S52 m52 3.2L 328i 328i e30 CI-450

Description: Clean Injection Performance CI-450 Pro Series 450cc injectors designed to suit BMW e36 6 Cylinder engine. The injectors will fit the factory fuel rail. The Injectors are also supplied with plug and play injector connectors which allows the injectors to plug right into the factory injector harness. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. The injectors are compatible with all known fuels including e85. The injectors retain a consistent linear flow from 3 bar to 7 bar fuel pressure. Very tuner friendly with fuel trimming down to 1.1ms. The injectors will support over 300whp with correct tuning and fuel type. The injectors utilize a 4-hole disc mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Injectors are dynamically and statically flow-tested on the industry-leading ASNU Classic test equipment. They are then sealed and packed in balanced sets within 1 percent. Injectors will come with a flow sheet with full data specs including injector latency/dead time data for easy tuning. Clean Injection Pro Series Fuel Injectors are built to stringent OE requirements that offer identical factory fit for easy installation. They deliver an accurate, tightly controlled fuel spray pattern that allows for more efficient vaporization. Clean Injection Pro Series Fuel Injectors feature internal seal rings protected from fuel exposure for longer life and improved sealing materials to provide cold sealing to -40°C for better cold starts. Plus, injectors are manufactured using components and seals that aren't sensitive to different fuels or fuel blends, including ethanol mixtures. Clean Injection Pro Series Fuel Injectors also provide optimal performance thanks to extra fuel filtering protection to eliminate contaminants. INJECTOR FEATURES:Made in U.S.A trusted quality! E85 Compatible!Flow Matched Sets within ≤ 1% Static and Dynamic flow ratesFull Injector Latency Data ProvidedTunable to factory Rock solid IdleExcellent Fuel AtomizationDirect Plug and Play FitFast Response timeConsistent performance all the way to 100psi+ Fuel Pressures2 Year Unlimited Mile WarrantyStainless Steel Internals Fitment Guide: 1994-1999 M3 S50/S52 3.0L/3.2L1987-1995 325i M20/M50 2.5L1996-1999 328i M52 2.8L1996-1999 323i M52 2.5LM5 S38 3.6L525i M50 2.5LZ3 S52 3.2LZ3 M52 2.8LM30 3.5LM20 2.5L Injector specs: Static Flow Rate @ 43.5PSI (300 KPa) = 450cc Coil Resistance: 12 Ohms / High Impedance / Saturated 14mm Inlet Diameter o-rings60MM length Factory fitted with Viton upper and lower o-ring

Price: 259.95 USD

Location: Acworth, Georgia

End Time: 2025-01-19T16:25:29.000Z

Shipping Cost: N/A USD