Auto Command Keyless remote clicker beeper EZSDEI24171 RPN 24161 DEI autocommand

Description: Stock Photo See pictures for an example of what you will receive. One (1) security system door opener keyless entry remote fob alarm replacement transmitter keyfob clicker controller control AutoCommand FCC ID: EZSDEI24171 ( Interchangeable FCC: EZSDE124171) Part Number: RPN 24161 Frequency: 433 MHz LED color: red 4 buttons: LOCK/UNLOCK, PANIC, START See Item Specifications for more details Compatible with the following systems: Hornet 554T Autocommand 20095 41026 41026T Programming Instructions: LEARNING YOUR TACH SIGNAL If using a tach wire, you must learn the tach signal after completing the installation. To learn tach signal: 1. Start car with key 2. Wait about 5 seconds for the engine to idle down 3. Press and hold the Momentary switch (about 10 seconds) 4. Tach learned: After a few seconds the LED will flash 2 times and turn on. Continue to hold the switch for 2 - 3 seconds and release. 5. Tach not learned: The LED will not turn on and will flash 3 times when the momentary switch is released. Check the connections and try again. note! If using a tach signal, the tach signal MUST be learned before using the remote starter. Your system can learn up to 4 transmitters. The following proce- dure will show you how to add additional transmitters or replace old ones. Each transmitters can be programmed one button at a time or you can use an auto learn procedure that learns the intended factory configuration. Learning one button at a time is generally only used when using one transmitters to control two different cars. Being able to program functions to different channels on each transmitters prevents multiple cars from responding simultaneously. 1.Turn the ignition ON 2.Press/release the momentary switch the same number of times as the desired transmitter learn Step number, and then Press/HOLD. 3.After Holding the momentary switch for 2 seconds the LED will begin to flash to indicate of the accessed transmitter learn Step. 4.Press the transmitter button that you want to control the function assigned to that transmitter learns Step; the Horn/Siren will emit a long chirp. note! For transmitter learn Step #1, you must press the “*” button on the transmitter, this will automatically program the transmitter buttons to the default function configuration. See the transmitter button auto learn chart for the assignment functions. You can learn more than one transmitter function at a time by advancing to another transmitter learn Step. To do this, first release the momentary SW and then press/release it the same number of times as the difference between the current transmitter learn Step and the desired transmitter learn Step, and then press/HOLD it. example! To advance from transmitter learn Step 2 to transmitter learn Step 8, release the momentary SW and then press/release it 6 times and HOLD it on the 7th press. After Holding the Valet SW for 2 seconds the LED will flash 8 times and repeat. You can now learn a transmitter button to step 8. There are several ways to exit transmitter Learning, by TimeOut, Ignition or momentary SW Presses. 1. TimeOut: If more than 15 seconds elapse between momentary SW presses or transmitter signals. 2. Ignition: If the Ignition is turned off at any time during transmitter Learning. 3. Momentary SW presses: if you press/release the momen- tary SW more times than transmitter Learning steps in the menu. The Horn output will pulse 5 times rapidly and the Led will turn off to indicate exiting feature programming Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days. PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store. Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u). Warranty/Returns: 1. We have a 30 day return policy. 2. All returns for replacements and refund need an RMA #. 3. Please contact us before returning items so we can give you the RMA # and the proper return address. 4. No refunds / replacements will be granted without an RMA# Does this keyless remote entry come with a battery? Yes. It will have a working battery installed. Battery Condition: A. All remotes sold on Keyless4u include working batteries. B. Installed batteries are not tested for battery life- they are simply working. Some are new and some are used. Normal 0 false false false EN-US X-NONE X-NONE . . . . . . . . . .

Price: 39.08 USD

Location: Wellsboro, Pennsylvania

End Time: 2024-01-08T03:24:12.000Z

Shipping Cost: 5.96 USD