Autel PS100 Power Scan Circuit Tester Electrical Power Probe Diagnostic 12V/24V

Description: Description: Autel PS100 FAQ:1.Is the PowerScan Probe Tester computer and air bag safe?The tool LED and LCD pull no more than 1 milliamp of current,therefore when using it as a test light or multimeter it is computer and airbag safe. However, pressing the power switch is a different story. When you press the switch forward, you are conducting full battery current to the tip of the probe. There is a nice safety feature built into the tool. Simply connect the extra ground lead to the tool and press the power switch forward until it trips the circuit breaker.This will prevent power from going to the tip but still allow you to use the tool as a multimeter. When you are away from computer components, simple press the reset button and you are ready to power up again.2.Why do I have no power at the tip when I am pressing the power switch forward but the red LED is on?The power switch goes through a lot. It is one of the few things that go wrong with the tool. The switch is a consumable that needs to be replaced on occasion. We have made it real simple to not only change it but also buy a new switch. The switch can be snapped out and replaced in seconds. You can buy switches from your Autel authorized tool supplier. The tool with the Rocker Switch slots makes it easy to replace a worn switch in the field without having to send it in for repair.PowerScan PS100:The PowerScan Tool is the most revolutionary circuit tester to date. Featuring AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator, the PowerScan is truly the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician looking for a fast and accurate solution to electrical system diagnostics.Main Feature:1.Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation2.Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip3.With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.4.Simultaneously uses the hot lead and the ground lead to activate components right in your hand5.Instantly identifies positive, negative and open circuits6.Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses7.Instantly checks continuity of switches, relays and diodes8.Circuit breaker protected9.Built-in Flashlight enables you to work in the dark10.Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment11.20ft (extendable) cable provides excellent accessibility to test along the vehicle12.Extremely easy to use and highly reliableAutel PowerScan PS100 Work Mode:DC Voltage:While the tool in this mode,contact the probe tip to a circuit,then the LCD display will read the DC voltage with a resolution of 0.1 volt.AC Voltage:While the tool in this mode,contact the probe tip to a circuit,then the LCD display will read the Max voltage,the Min voltage,frequency and duty cycle.Resistance:While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.Tone On/Off:While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off.Do More Functions Than Multimeter:Select the diagnostic model by depressing the mode button,and then connect the probe tip to the circuit,the LED is to display DC/AV voltage,resistance.Following & Locating Short Circuits:Remove the blown fuse from the fuse box.Use the probe tip to activate and energize each of the fuse contacts to find to short circuits.PS100 With Two Power Connection Methods:PS100 Circuit tester has TWO power resources. Directly connect the AUTEL PS100 with the cigarette lighter or battery electrode, then you are ready to test.Specifications:Display:TFT color display (160 x 128 dpi)Operating Temperature:0 to 60°C (32 to 140°F)External Power:12.0 or 24.0 V power provided via vehicle batteryLength/Width/Height:26mm(4.96")/46.5mm(1.83")/35mm(1.38")NW:0.105kg (0.23lb),GW: 0.726 kg(1.6lb)Accessories:1xRugged blow molded case1x20ft. extension cable1xProbe tip1xBattery hookup clips1xCigarette lighter adapter1xUser's Manual

Price: 85 USD

Location: Hebron, Kentucky

End Time: 2024-03-08T03:31:50.000Z

Shipping Cost: 0 USD