AudioControl All Weather IPX6 Waterproof 2-Channel Compact Amplifier ACX-300.2

Description: Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. This fixed-price listing includes the AudioControl ACX-300.2 all weather four channel compact amplifier. AudioControl’s ACX-300.2 all-weather amplifier delivers honest power levels to the sound system in your boat, motorcycle, off road vehicles and more. The ACX-300.2 is a two channel system, that will ensure your open-air speakers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making this all-weather amplifier the perfect solution for your next adventure. The ACX-300.2 two-channel amplifier carries an IPX6 waterproof rating, which means you can clean it off with a powerful water jet spray and it won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections. The ACX-300.2 can produce 75 watts RMS per channel — enough to hear your music clearly over the sounds of wind and motors. Want to power a subwoofer? This amp can also operate in one-channel mode to power a sub with 300 watts RMS. What's Included? 2-Channel amplifier (attached 12" power/ground/input/output harnesses)7" Power & ground harness (10 ga.)7" Speaker output harnessPower & ground harness (empty)2 Crimp-on terminals for power & ground harnessHarness locking pin2 Rubber grommetsFour 3/4" screwsQuickstart guideACX-300.4 Features 2-channel powersports/marine amplifier75 watts RMS x 2 at 4 ohms150 watts RMS x 2 at 2 ohms300 watts RMS x 1 bridged at 4 ohmsClass D amp technologySelectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave) Overview: The AudioControl ACX-300.2 all-weather amplifier is a compact 2-channel amp designed for your boat, ATV, UTV, motorcycle, and more. The all-weather amp can provide 75 watts RMS x 2 @ 4-ohms, 150 watts RMS x 2 @ 2-ohms, and 300 watts RMS x 1 bridged @ 4-ohms. The ACX-300.2 can accept RCA line-level or speaker-level input signals, making it ideal for OEM and aftermarket headunits.High-/Low-Level Inputs: The ACX-300.2 includes a pair of 12" RCA inputs that can accept either high- or low-level input signals. If running high-level signals, RCA to speaker-wire adapters must be used and are sold separately, or the RCA connectors must be cut off and the bare-ended wire used. A 2-way Input Level switch lets you select High or Low.Low-Level Input Range: 500mV - 6VrmsHigh-Level Input Range: 1Vrms - 12VrmsCrossover The ACX-300.2 includes a 12 dB/octave Linkwitz-Riley high-pass filter; a 3-position switch lets you select the crossover point from 80Hz, 120Hz, or Bypass.Gain Maximized LED The ACX-300.2 features a Gain dial for setting the overall input level. As you turn up the Gain with your head unit set at about 75% volume, a Maximized LED indicator will light to let you know when the signal is approaching the clipping point, helping to avoid running a distorted signal to your speakers.GTO (Great Turn On) Signal Sense If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off.All-Weather Construction The ACX-300.2 amp has been constructed to withstand outdoor environments and carries an IPX6 waterproof rating, making it impervious to weather. A removable cover-plate on top of the amp protects the controls and LED indicators from dust and moisture ingress. The cover-plate screws require a 2.5mm hex bit for removal (not included). All wire harnesses on the amp are built-in for added weather resistance:Audio Inputs: Four RCA jacks on 12" input cables are provided, each with protective plastic caps.Speaker Outputs: Two 12" 4-wire output harnesses are terminated in waterproof connectors. Matching 7" harnesses with bare-ended 18-gauge wires are included.Power/Ground/Remote: A 12" section of 10-gauge power and ground wire terminates in a waterproof connector, with matching 7" harness and bare-ended wire. An additional empty power/ground connector is provided, letting you build your own harness to match the amp's power/ground connector. A bare-ended 12", 18-gauge remote turn-on wire is provided in the power/ground harness. ACX-300.2 Specifications Preamp/Speaker-Level Inputs: 2 (RCA)Preamp-Level Voltage Range: 500 mV - 6 VrmsSpeaker-Level Voltage Range: 1 Vrms - 12 VrmsContinuous Output Power (14.4 V):4-Ohm: 50W RMS x 22-Ohm: 75W RMS x 2Bridged 4-Ohm: 150W RMS x 1Frequency Response: 26 Hz - 22 kHzSignal to Noise Ratio: 102 dBA, Ref 50W @ 4-OhmTHD+N: <0.05%High-Pass Crossover: 12dB/octave Linkwitz-Riley; 80 Hz/120 Hz/BypassWeather-Proof Rating: IPX6Dimensions: Width = 10.70", Height = 2.38", Depth = 3.87"Weight: 3.15 lbs. AudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of two years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer.A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments.“Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all of these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (two years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time.Here Are The Conditional Conditions1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us.2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase.3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip.4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty.5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12 volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private).. This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counter-weight for your daughter’s trebuchet project, something will go wrong.6. If an authorized United States AudioControl dealer installs your component, the warranty is two years.Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused.Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Promises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component.Failure to properly register your AudioControl warranty may negate any service claims. Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.

Price: 217.55 USD

Location: San Juan, Puerto Rico

End Time: 2024-09-27T23:06:42.000Z

Shipping Cost: N/A USD