ATS22/600/3N3 McPherson Automatic Transfer Switch New & Original

Description: McPherson ControlsShips from USAFree ShippingBrand New ATS22/600/3N3 McPherson Automatic Transfer Switch New & Original Product Summary Automatic Transfer Switch 600 AMPS 3 Pole / 1-3 Phase, 50/60hz 4 wire – including neutral ATS-22DC Advanced Controller (208-480V adjustable) Heavy duty motorized breaker style switch P/N BTS3BE0600 Multi-Voltage – No additional parts required NEMA 3R Weather-Proof Enclosure for Indoor or Outdoor use Export type, Non-UL DOWNLOAD DATASHEET – Click Here GENERAL The ATS22/600/3N3 600 Amp 3 Pole ATS is designed for residential, commercial and industrial applications. The transfer switch provides flexibility of both manual and automatic functions. Can work either in 50 or 60 Hz and up to 480 volts. It can be installed for indoor or outdoor environments. BASIC FEATURES User-friendly LED display Exerciser Timer included. 1 to 4 week configurations Very easy to program directly on the front controller Under and over voltage normal source monitoring Under and over voltage emergency source 1Ph monitoring Count down display in real time Transfer failure output signal Testing feature via the front ATS control for system check, with or without load Operator can save configuration preferences right from the ATS22 panel. No computer or special module needed. 2-wire dry contact autostart output (Generator must have autostart enabled controller) POPULAR INCLUDED FEATURES Time Delay Emergency to Normal (TDEN) TDEN delays the transfer from the emergency source to the normal Source to permit stabilization of the normal source before retransfer is made. Timing begins when the normal source becomes available. Adjustable TDEN time range: 00 to 999 seconds Time Delay Normal to Emergency (TDNE) TDNE delays the transfer from normal to emergency to permit stabilization of the generator before the retransfer is made. Timing begins when the standby source becomes available. Adjustable TDEN time range: 00 to 250 seconds Time Delay Engine Start (TDES) The TDES Time (Delays Engine Start) this timer prevents nuisance start because of momentary electrical glitches. If power normalizes before the countdown ends, the controller skips the engine startand resets the timer Adjustable TDES time range: 00 to 30 sec. Time Delay Engine Cool-down (TDEC) TDEC permits the generator to run unloaded after the ATS retransfer back the load to Normal source. Timing begins when the ATS connects back to Normal source Adjustable TDEC range: 00 to 250 sec. NOTE:>Listing photos are representative and may not reflect exact model>High voltage can harm or cause death. This switch should only be installed or serviced by a trained technician>Superceeded from ATS21/600/3N3, same switch, upgraded controllerBUY NOW!PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.100% Brand NEWFree ShippingShip Same DayProduct Summary ---Automatic Transfer Switch ---600 AMPS ---3 Pole / 1-3 Phase, 50/60hz ---4 wire – including neutral ---ATS-22DC Advanced Controller (208-480V adjustable) ---Heavy duty motorized breaker style switch P/N BTS3BE0600 ---Multi-Voltage – No additional parts required ---NEMA 3R Weather-Proof Enclosure for Indoor or Outdoor use ---Export type, Non-UL --- [DOWNLOAD DATASHEET – Click Here] (https://www.jovalindustrial.com/wp-content/uploads/2023/06/ATS22-600-3N3-Mcpherson-ATS-Catalog.pdf) GENERAL The ATS22/600/3N3 600 Amp 3 Pole ATS is designed for residential, commercial and industrial applications. The transfer switch provides flexibility of both manual and automatic functions. Can work either in 50 or 60 Hz and up to 480 volts. It can be installed for indoor or outdoor environments. BASIC FEATURES ---User-friendly LED display ---Exerciser Timer included. 1 to 4 week configurations ---Very easy to program directly on the front controller ---Under and over voltage normal source monitoring ---Under and over voltage emergency source 1Ph monitoring ---Count down display in real time ---Transfer failure output signal ---Testing feature via the front ATS control for system check, with or without load ---Operator can save configuration preferences right from the ATS22 panel. No computer or special module needed. ---2-wire dry contact autostart output (Generator must have autostart enabled controller) POPULAR INCLUDED FEATURES ---Time Delay Emergency to Normal (TDEN) ------TDEN delays the transfer from the emergency source to the normal Source to permit stabilization of the normal source before retransfer is made. Timing begins when the normal source becomes available. ------Adjustable TDEN time range: 00 to 999 seconds ---Time Delay Normal to Emergency (TDNE) ------TDNE delays the transfer from normal to emergency to permit stabilization of the generator before the retransfer is made. Timing begins when the standby source becomes available. ------Adjustable TDEN time range: 00 to 250 seconds ---Time Delay Engine Start (TDES) ------The TDES Time (Delays Engine Start) this timer prevents nuisance start because of momentary electrical glitches. If power normalizes before the countdown ends, the controller skips the engine startand resets the timer ------Adjustable TDES time range: 00 to 30 sec. ---Time Delay Engine Cool-down (TDEC) ------TDEC permits the generator to run unloaded after the ATS retransfer back the load to Normal source. Timing begins when the ATS connects back to Normal source ------Adjustable TDEC range: 00 to 250 sec. NOTE: >Listing photos are representative and may not reflect exact model >High voltage can harm or cause death. This switch should only be installed or serviced by a trained technician >Superceeded from ATS21/600/3N3, same switch, upgraded controller McPherson ControlsShips from USAFree ShippingBrand New ATS22/600/3N3 McPherson Automatic Transfer Switch New & Original Product Summary Automatic Transfer Switch 600 AMPS 3 Pole / 1-3 Phase, 50/60hz 4 wire – including neutral ATS-22DC Advanced Controller (208-480V adjustable) Heavy duty motorized breaker style switch P/N BTS3BE0600 Multi-Voltage – No additional parts required NEMA 3R Weather-Proof Enclosure for Indoor or Outdoor use Export type, Non-UL DOWNLOAD DATASHEET – Click Here GENERAL The ATS22/600/3N3 600 Amp 3 Pole ATS is designed for residential, commercial and industrial applications. The transfer switch provides flexibility of both manual and automatic functions. Can work either in 50 or 60 Hz and up to 480 volts. It can be installed for indoor or outdoor environments. BASIC FEATURES User-friendly LED display Exerciser Timer included. 1 to 4 week configurations Very easy to program directly on the front controller Under and over voltage normal source monitoring Under and over voltage emergency source 1Ph monitoring Count down display in real time Transfer failure output signal Testing feature via the front ATS control for system check, with or without load Operator can save configuration preferences right from the ATS22 panel. No computer or special module needed. 2-wire dry contact autostart output (Generator must have autostart enabled controller) POPULAR INCLUDED FEATURES Time Delay Emergency to Normal (TDEN) TDEN delays the transfer from the emergency source to the normal Source to permit stabilization of the normal source before retransfer is made. Timing begins when the normal source becomes available. Adjustable TDEN time range: 00 to 999 seconds Time Delay Normal to Emergency (TDNE) TDNE delays the transfer from normal to emergency to permit stabilization of the generator before the retransfer is made. Timing begins when the standby source becomes available. Adjustable TDEN time range: 00 to 250 seconds Time Delay Engine Start (TDES) The TDES Time (Delays Engine Start) this timer prevents nuisance start because of momentary electrical glitches. If power normalizes before the countdown ends, the controller skips the engine startand resets the timer Adjustable TDES time range: 00 to 30 sec. Time Delay Engine Cool-down (TDEC) TDEC permits the generator to run unloaded after the ATS retransfer back the load to Normal source. Timing begins when the ATS connects back to Normal source Adjustable TDEC range: 00 to 250 sec. NOTE:>Listing photos are representative and may not reflect exact model>High voltage can harm or cause death. This switch should only be installed or serviced by a trained technician>Superceeded from ATS21/600/3N3, same switch, upgraded controllerBUY NOW!Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.100% Brand NEWFree ShippingShip Same DayProduct Summary Automatic Transfer Switch 600 AMPS 3 Pole / 1-3 Phase, 50/60hz 4 wire – including neutral ATS-22DC Advanced Controller (208-480V adjustable) Heavy duty motorized breaker style switch P/N BTS3BE0600 Multi-Voltage – No additional parts required NEMA 3R Weather-Proof Enclosure for Indoor or Outdoor use Export type, Non-UL DOWNLOAD DATASHEET – Click Here GENERAL The ATS22/600/3N3 600 Amp 3 Pole ATS is designed for residential, commercial and industrial applications. The transfer switch provides flexibility of both manual and automatic functions. Can work either in 50 or 60 Hz and up to 480 volts. It can be installed for indoor or outdoor environments. BASIC FEATURES User-friendly LED display Exerciser Timer included. 1 to 4 week configurations Very easy to program directly on the front controller Under and over voltage normal source monitoring Under and over voltage emergency source 1Ph monitoring Count down display in real time Transfer failure output signal Testing feature via the front ATS control for system check, with or without load Operator can save configuration preferences right from the ATS22 panel. No computer or special module needed. 2-wire dry contact autostart output (Generator must have autostart enabled controller) POPULAR INCLUDED FEATURES Time Delay Emergency to Normal (TDEN) TDEN delays the transfer from the emergency source to the normal Source to permit stabilization of the normal source before retransfer is made. Timing begins when the normal source becomes available. Adjustable TDEN time range: 00 to 999 seconds Time Delay Normal to Emergency (TDNE) TDNE delays the transfer from normal to emergency to permit stabilization of the generator before the retransfer is made. Timing begins when the standby source becomes available. Adjustable TDEN time range: 00 to 250 seconds Time Delay Engine Start (TDES) The TDES Time (Delays Engine Start) this timer prevents nuisance start because of momentary electrical glitches. If power normalizes before the countdown ends, the controller skips the engine startand resets the timer Adjustable TDES time range: 00 to 30 sec. Time Delay Engine Cool-down (TDEC) TDEC permits the generator to run unloaded after the ATS retransfer back the load to Normal source. Timing begins when the ATS connects back to Normal source Adjustable TDEC range: 00 to 250 sec. NOTE:>Listing photos are representative and may not reflect exact model>High voltage can harm or cause death. This switch should only be installed or serviced by a trained technician>Superceeded from ATS21/600/3N3, same switch, upgraded controller

Price: 4533 USD

Location: Hialeah, Florida

End Time: 2025-01-23T18:18:12.000Z

Shipping Cost: N/A USD