Atomic Clock With Indoor Outdoor Temperature, Self-setting Digital Wall

Description: 𝗔𝗰𝗰𝘂𝗿𝗮𝘁𝗲 𝗔𝘁𝗼𝗺𝗶𝗰 𝗖𝗹𝗼𝗰𝗸 - The atomic clock has a built-in receiver that automatically synchronizes itself with the WWVB radio broadcast, which will update time automatically every midnight to ensure accurate time. It has 4 time zones: EST, CST, MST, PST. 𝗔𝘁𝗼𝗺𝗶𝗰 𝗖𝗹𝗼𝗰𝗸 𝘄𝗶𝘁𝗵 𝗜𝗻𝗱𝗼𝗼𝗿 𝗮𝗻𝗱 𝗢𝘂𝘁𝗱𝗼𝗼𝗿 𝗧𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 - This atomic clock can display both indoor and outdoor temperature, helps you better manage your daily life. The wireless outdoor sensor monitors and transmits the outdoor temperature to the clock to display. The sensor should be placed within 330 feet and out of direct sunlight or rain. 𝗗𝗶𝗴𝗶𝘁𝗮𝗹 𝗔𝗹𝗮𝗿𝗺 𝗖𝗹𝗼𝗰𝗸 𝗕𝗮𝘁𝘁𝗲𝗿𝘆 𝗢𝗽𝗲𝗿𝗮𝘁𝗲𝗱 - The clock is supported by 3 x AAA battery and outdoor sensor is supported by 2 x AA battery. (Batteries are not included). When batteries of clock or sensor are running low, there would be a low battery symbol appearing on screen and blinking, reminding you to replace new batteries in time. 𝗟𝗮𝗿𝗴𝗲 𝗗𝗶𝘀𝗽𝗹𝗮𝘆 𝘄𝗶𝘁𝗵 𝗧𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲, 𝗗𝗮𝘆 𝗮𝗻𝗱 𝗗𝗮𝘁𝗲 - Two temperature modes switchable (Celsius and Fahrenheit). When click button, both indoor and outdoor temperature exchange mode at the same time. There are also two display modes of time selectable: Standard Time and Military Time. 𝗔𝗨𝗧𝗢 𝗗𝗦𝗧 𝗮𝗻𝗱 𝗔𝗹𝗮𝗿𝗺 – With DST on, clock will go forward or fall back one hour automatically in daylight saving time. When DST or alarm is on, there would be a corresponding icon staying on screen. Both of them could be turned off manually if for no need. Get Started Quickly 1. Adjust the outdoor temperature link channel of clock and outdoor sensor to be same，like A-A, B-B, C-C. 2. Install batteries (3xAAA for clock and 2xAA for outdoor sensor) and choose your time zone. 3. Outdoor temperature starts to connect first, once finished, clock starts to search for WWVB signal. 4. Put clock to a place with good signal for better reception and outdoor sensor to a safe place outside within 330feet/100m. 5. Clock updates time automatically when signal received successfully. Tips: In most areas, a signal can only be received at night. If your clock does not receive WWVB signal in daytime, please wait overnight and it will be set in the morning. Outdoor temperature range: -40℉ ~ 158℉ (-40°C to 70°C). Indoor temperature range: 32℉ ~ 122℉ (0°C to 50°C). When clicking to change the temp display unit, indoor and outdoor will change simultaneously. The outdoor sensor should be placed within 300ft/100m and out of direct sun light or rain. This atomic is a wall clock and table clock. There are hangging holes on the clock back, you can hang it on wall easily. There is also a folding stan on the back, so it can also be used as a desk clock.

Price: 32.99 USD

Location: Portland, Oregon

End Time: 2025-02-03T14:16:33.000Z

Shipping Cost: 0 USD