AQUA BURST X-35 SUPER HEAVY DUTY 3/4" BRASS IMPACT SPRINKLER- THE BEST QUALITY

Description: You will receive 3/4" Aqua Burst super heavy duty 3/4" full or part circle brass impact sprinkler. I decided to write this listing as if we were talking in person and you asked me which 3/4" brass impact sprinkler I would buy and why. I am positive I have personally rebuilt and tested more 3/4" adjustable brass impact sprinklers than anyone over the last 30+ years so here is why the X-35 is my choice.1) The heart of any impact sprinkler is the arm it must with stand years of impact action. The X-35 is all brass and has been coined under intense pressure to hold its shape for years. The arm additionally features triple bridge construction to increase durability.2) The X-35 is the only 3/4" adjustable sprinklers on the market today which features a heavy duty all brass trip assembly. If you are unsure what the trips are it is the two pieces that work together with the arm to allow the sprinkler to switch directions. If you look at the Rain Bird #35 you will see that they changed to stainless steel trips if you look at the wire at the bottom that is used to adjust the arc that is is a weak point that fails all the time, problem is they don't sell it seperate you will need to buy the entire assembly!3) The Aqua burst X-35 will run on a wide array of nozzle sizes and if you need to replace or change sizes up or down in volume its under $1ea versus $8-$10 for a Rain Bird #35 replacement nozzle.4) Try going to your hardware store, farm supply or irrigation house to get replacement parts such as washers for any brand of brass impacts. Here is what is going to happen, you will find that they are not going to know what to order or the parts are not available individually or at all! The X-65 is the most rebuildable 1" sprinkler on the market today.5) The bearings of this XCAD sprinkler are now being treated with red X-33 sealant The sealant eliminates your need for teflon tape and will make removal and installation easier.6)Price and quality: I believe that quality always cost less in the long run and this is especially true with sprinklers for so many reasons, with the X-35 you get the best of both worlds great quality at a great price.7) Sprinkler Innovations will be here to help you keep your XCAD/ Aqua Burst products running for years!* Great for pasture, areanas, dust control, turf, farming and more!**The XCAD company that builds these great sprinklers is combining 1950's quality with todays state of the art materials and computer degins to create the best sprinklers on the market today.We are incuding 2 free drive nozzles with your sprinkler a lower flow 5/32 and the standard 3/16 nozzle! Please bid with confidence. Since 1985, I have rebuilt and tested more brass impact sprinklers than anyone. Our customers have included many of the most prestigious golf courses, college and pro sports stadiums, farms, and ranches in the USA. Now because of the internet our new and rebuilt sprinklers, as well as repair parts and rebuilding services, are available to everyone. Recently a couple of sellers have popped up on ebay offering rebuilt sprinklers. Please don't assume that all rebuilt sprinklers are rebuilt the same way and are of the same quality. These other reconditioners are using high impact glass bead to clean the brass (like sand blasting); I can tell because back in the 80's I did the same thing( I don't care what they say yellow sprinklers = impact blasting). You end up with a nice looking, shiny brass sprinkler; however, I found that the glass bead removed small amounts of the brass which pitted the nipple and bearing. These pits held dirt, debris, and water deposits which did not allow the sprinkler to self flush, as it was designed to do. The sprinkler ends up freezing up or grinding down the washers and the bearing. Glass beading not only does not clean the most important part of the sprinkler, the inside, it makes the sprinkler bearing less rebuildable the next time due to the damage. I included a picture of brass nipples cleaned using my unique cleaning process that took years to perfect - glass smooth with no brass missing! If you buy a so-called "rebuilt" sprinkler from someone else and this spring you turn it on and, for whatever reason, it doesn't work, will they be there to help you? Do they have the inventory to replace it? I will. I do. Thanks, Frank

Price: 49.5 USD

Location: Santa Ynez, California

End Time: 2024-03-26T01:07:23.000Z

Shipping Cost: 0 USD