AEM 30-3300 Water Methanol Injection Kit V2 MAP Sensor & BOOST CONTROLLER 35PSI

Description: AEM 30-3300 WATER/METHANOL INJECTION KIT V2 PROGRESSIVE PUMP CONTROLLER WITH "BOOST SAFE" - INTERNAL MAP W/ 1 GALLON LOW PROFILE TANK Increase power, reduce air inlet temps and suppress detonation at all boost levels ***IF YOU SEE THIS ADVERTISED FOR LESS THEN $465.89, THEY ARE NOT AN AUTHORIZED DEALER AND YOU MAY RUN INTO WARRANTY & SUPPORT ISSUES IN THE FUTURE. AXXIS OFF ROAD IS AN AEM AUTHORIZED DEALER*** *FACTORY SEALED WITH 100% AEM WARRANTY**SHIPS FEDEX OR UPS SAME DAY WHEN ORDERED BY 4PM PST**THE MOST COMPLETE KIT AVAILABLE ON THE MARKET**UNIVERSAL KIT FOR TURBO OR SUPERCHARGED APPLICATIONS**BOOST DEPENDENT CONTROLLER WITH ON-BOARD MAP SENSOR* COMES WITH 3 INJECTOR NOZZLES- 250CC/500CC/1,000CC MIN NOZZLES** THIS KIT INCLUDES NEW STYLE INJECTOR NOZZLES THAT HAVE INTERNAL CHECK VALVES. AN EXTERNAL CHECK IS NO LONGER NEEDED. THE AEM WATER/METHANOL INJECTION SYSTEM ADVANTAGEWater/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.Water/Methanol for up to 35 PSI on Forced Induction Gas Race EnginesThis AEM kit is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup. Note: FOR OPTIMUM RESULTS, ALL WATER/METHANOL INJECTION SYSTEMS AND GAUGES SHOULD BE RUN WITH AN AEM INLINE FILTER (AEM PART #30-3003) Robust, Easy to Use Controller DesignsThe new controller designs (Boost Dependent Kit PN 30-3300 & Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harnesses positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs.Simplified WiringAEM’s Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.Integrated Boost Safe FeatureThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Heavy-Duty High Pressure Injection PumpAEM’s internally-bypassed water/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.Low-Profile 1.15 Gallon TankAEM’s gas Water/Methanol Injection Systems are available with or without a compact 1.15 gallon tank that features an anti-starvation reservoir. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris.Machined Billet Injectors and NozzlesAEM includes one precision-machined billet injector in its gasoline Water/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water/methanol flow to an engine’s horsepower output. Revised Flow Control Strategy for More Linear Fluid DeliveryAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabsWiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid“Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectablePrecision-machined billet-aluminum injector with integral check valveThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)1.15 gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tankless systems available)20 feet of injection tubing includedLED dash light for system status and low fluid warning Reduces Air Inlet Charge TempsThe term “liquid intercooling” with water/methanol injection refers to a highly atomized mist of water/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge.Reduces Detonation (Knock)Water absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas.Reduces Carbon DepositsModern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy. DYNO SHEETS- THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION.IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS. IF THIS PRODUCT WAS PURCHASED IN ERROR, DO NOT INSTALL AND/OR USE IT. THE PURCHASER MUST ARRANGE TO RETURN THE PRODUCT(S) FOR A FULL REFUND.THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES, HOWEVER CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS. Important Safety Notice Regarding MethanolAEM Water/Methanol Injection Systems are chemically compatible with a mixture of water and methanol, which we strongly recommend does not exceed a concentration of more than 50% methanol. In addition to inherent dangers of using 100% methanol, doing so will damage the system's flow sensor and void the warranty on this component.Methanol is a toxic and highly flammable chemical. 100% Methanol ignites easily and burns vigorously with an almost undetectable flame. Methanol can be absorbed through the skin and even small amounts can cause blindness or even death. Using this fluid at high pressures, without dilution, in an under-hood environment with nylon lines and push-to-connect fittings is very unsafe. The performance advantages of using greater than 50% methanol concentrations are small, if they exist at all. However, the safety issues are very real and far outweigh any perceived benefit of running high concentrations of methanol.WARNING!Improper installation and/or adjustment of this product can result in major engine/vehicle damage. For technical assistance visit our dealer locator to find a professional installer/tuner near you.Note: AEM holds no responsibility for any engine damage or personal injury that results from the misuse of this product, including but not limited to injury or death caused by the mishandling of methanol. Thank You for Shopping with Axxis Off Road if you have any questions, please contact us before bidding through the "ask a question" link at the bottom of the page.We will do our best to respond immediately during normal business hours. Shipping Information:For international shipments, orders may be subject to additional duties, taxes, charges, fees, and costs associated with the shipment of the item once it has reached its destination. These charges are the buyer's responsibility.Shipping is available to a PO box and any APO/AA/AE/AP address at an extra charge for this service when available.Most orders will ship within 1-3 business days from the time payment is received and cleared.Shipments are not made on weekends or holidays.Express shipping is available at the buyer's expense. Please contact us for a shipment quote to your location.Some out of stock items are drop shipped from a distribution warehouse or directly from the manufacturer, so tracking information may not be available immediately.Tracking numbers will be updated to as quickly as possible once an order has processed and shipped. Tracking numbers are updated manually, so please allow enough time for your information to be entered after your order has been placed. We ship as quick as possible, same day in most cases. Orders placed on weekends and holidays will be processed the following business day. We are willing to ship products internationally. International buyers, please contact us for a shipping quote.International Buyers are responsible for all duties, fees and brokerage fees. International orders are generally shipped USPS. International buyers may request a shipping method other than USPS (ie UPS or DHL) Please contact us for a quote or with any question you may have. Return Policy: Returns will be accepted if the item is unused, uninstalled, in the original packaging and in brand new condition. Any errors in a part received, please contact us as soon as possible.We are not responsible for install mistakes. Items must be returned within 30 days from the purchase date.All returns must be approved and issued a (Return Authorization) RA # for return. The RA # must be on the outside of each package with the RA # in a visible area. Any package without the RA # will be refusedIf you have a cancellation please contact us before the item is shipped. Otherwise, see above return policy guidelines.Buyer is responsible for insuring and shipping the package on returned items.If your item was shipped for free, the shipping cost will be deducted from the returned item credit. This does not apply to defective items.Once an item is received & inspected, a credit or refund will be issued to the customer; If the item passes above criteria upon inspection.

Price: 492.83 USD

Location: 40+ WAREHOUSES ACROSS THE US

End Time: 2024-03-06T23:09:37.000Z

Shipping Cost: 0 USD