AD8495 Amplifier Module Thermal Precision K-Type Thermocouple Amplifier Output

Description: Description: The thermocouple signal is very small and must be amplified by considerable gain before it can be properly sampled by most ADCs. The AD8495 thermocouple amplifier provides a simple, low-cost solution for thermocouple temperature measurement. The integrated temperature sensor performs cold junction compensation. The fixed gain instrumentation amplifier amplifies the small voltage of the thermocouple to provide a 5 mV/°C output. The amplifier has high common-mode rejection and is capable of rejecting common-mode noise that may be picked up by long leads of thermocouples. For extra protection, the amplifier's high-impedance input allows for easy additional filtering. The AD849x output is a voltage proportional to the thermocouple measurement junction temperature (TMJ). To derive the measured temperature from the AD849x output voltage, use the transfer function TMJ=(VOUT−VREF)/(5mV/°C), VOUT=(TMJ×5mV/°C)+VREF. The AD8495 and AD8497 (Type K) instrumentation amplifiers have a gain of 122.4. With a single 5V supply, the 5mV/°C output allows these devices to cover a thermocouple temperature range of nearly 1000 degrees. Parameter: Reference pin provides offset adjustment Thermocouple disconnection detection Laser wafer adjustment to 1°C initial accuracy and 0.025°C/°C ambient temperature suppression Low power consumption: <1 mW (VS = 5 V) Rugged input withstands 4kVESD and provides overvoltage protection (OVP) up to VS±25V Linearity error less than ±2°C, this error is only caused by the nonlinearity of the thermocouple

Price: 10.76 USD

Location: shenzhen

End Time: 2024-09-21T02:33:16.000Z

Shipping Cost: 2.99 USD