Description: This variation listing is for various accessories used with turnouts by Peco. Listing is reflected as used; however, several are new as shown below. Accessory # Item Description PL-9 Mounting Plates Used (package has been opened). Each package contains 5 mounting plates and screws (screws are not original. For use with PL-10 series turnout motors (not included). PL-10 Turnout Switch Machine Motor New Peco switch machine motor. Motor is designed for use with Peco’s Streamline and Setrack turnouts. Requires a rectangular hole 40mm x 24mm approximately 1½” x 1”) in the layout baseboard when clipped directly to the underside of a Peco Turnout (use the PL-12/12X if above baseboard mounting is required). Attaching PL-13 and 15 Switches will enable switching for automatic polarity, etc. Please note that the listing is only for the PL-10 motor and not any of the other attachments. Installation instructions included in package. Listed as new although the top of the package is torn. PL-10E #1 Turnout Switch Machine Motor w/Extended Drive Pin (NIP) New Peco switch machine motor. Item # is PL-10E. Motor is designed for use with Peco’s Streamline and Setrack turnouts. Motor mounts to the underside of a layout so a ⅜” hole is required. A PL-9 Mounting Plate is also required to attach the motor to the underside of the baseboard. Attaching PL-13 and 15 Switches will enable switching for automatic polarity, etc. Please note that the listing is only for the PL-10E motor and not any of the other attachments. Buyer must also provide the turnout control switch and wiring. Installation instructions included in package. PL-10E #2 Turnout Switch Machine Motor w/Extended Drive Pin Used (package was open and assembly instructions are reproductions; however, the motor itself is new/unused). Motor is designed for use with Peco’s Streamline and Setrack turnouts. Motor mounts to the underside of a layout so a ⅜” hole is required. A PL-9 Mounting Plate is also required to attach the motor to the underside of the baseboard. Attaching PL-13 and 15 Switches will enable switching for automatic polarity, etc. Please note that the listing is only for the PL-10E motor and not any of the other attachments. Buyer must also provide the turnout control switch and wiring. PL-12 Turnout Adaptor Base New Peco adaptor base for use with Peco’s Streamline and Setrack turnouts. Base is fitted to the switch machine motor for above layout/baseboard use. Please note the listing is only for the adaptor base – turnout motor is not included. PL-13 Turnout Accessory Switch New Peco accessory switch for use with Peco’s Streamline and Setrack turnouts. Switch attaches to a switch machine to enable switching for automatic polarity, etc. Please note the listing is only for the accessory switch shown in the picture – turnout motor, wiring or other accessories are not included. Switch comes in an unopened package. It is new but packaging is worn/torn. PL-18 Studs and Washers New/unopened package of Peco studs and washer for use with Peco’s PL-17 Probe. Stud is mounted though a 3/32” hole in a control panel (maximum panel thickness is ⅜”) and wired to a turnout motor. Turnouts are operated by touching the studs with the Probe. According to the packaging, approximately 25 of each is included. Please note the listing is only for the studs and washers – wiring, turnout motor and Probe are not included. Package has worn edges/shelf wear. SL-10 Rail Joiners New/unopened package of 24 metal rail joiners by Peco suitable for Code 100 rails. Items are described as well as possible, but are sold "as is" so please contact me if you have any questions. This is one of numerous Peco items I am selling. I will combine multiple items to reduce shipping whenever possible. If you purchase this item and others I am selling, please request an invoice to receive a combined shipping discount. To request an invoice, either: select “Request total” from the “More actions” drop-down menu on the Purchase history page, or, access your eBay cart and then request an invoice (should be shown above items). I will reply with an invoice reflecting the combined shipping charge. Note: some buyers have indicated eBay’s system will not allow them to request a total from me when using their smart phone. If you are unable to request a total and do not have access to a PC, you will have to purchase the items and pay each item’s separate shipping cost. However, I will refund any shipping overage. Unless other arrangements are made, payment is to be made within two days after purchase or invoice is sent. Check out my other listings for more turnouts and out-of-production or hard-to-find kits, especially Athearn "blue-box "kits. Athearn discontinued manufacturing them in 2009, so they are becoming scarce and hard to find. With Athearn’s purchase of Model Die Casting, Inc., the MDC/Roundhouse kits have also been discontinued and are no longer available.
Price: 3.99 USD
Location: Austin, Texas
End Time: 2024-12-01T23:53:01.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: PECO
Type: Track
Rail System: Two-Rail System
Scale: 1:87
Gauge: HO
Available Variations
Color: PL-9
Price: 4.99 USD
Available Quantity: 1
Quantity Sold: 0
Color: PL-10
Price: 9.99 USD
Available Quantity: 1
Quantity Sold: 0
Color: PL-10E #1
Price: 9.99 USD
Available Quantity: 2
Quantity Sold: 0
Color: PL-10E #2
Price: 9.99 USD
Available Quantity: 2
Quantity Sold: 0
Color: PL-12
Price: 3.99 USD
Available Quantity: 1
Quantity Sold: 0
Color: PL-13
Price: 4.99 USD
Available Quantity: 6
Quantity Sold: 0
Color: PL-18
Price: 3.99 USD
Available Quantity: 1
Quantity Sold: 0
Color: SL-10
Price: 4.99 USD
Available Quantity: 3
Quantity Sold: 0
