Description: 1/4" USA Steel Fabricated Control Arms for 3.5-5" Lift Height 94-99 Dodge Ram 1500/2500/3500 4WD These are brand new 1/4" USA steel construction. They are CAD designed, CNC Plasma Cut and craftsman Welded fabricated control arms. They are designed to fit the front of a Dodge Ram 1500 2500 3500 4x4 with 3 1/2" to 5" lift height. These WILL fit the 1500 Megacab 4x4 as well.This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly. If you've installed a leveling kit, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. Our ARMS are guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Some competitors save cost by designing only ONE size and selling you a kit full of spacers, shims or washers for you to make up for their reduced investment in your model truck. Some of these lower cost competitors buy their "One Size Fits All" arms from China. Stryker is proud of our MADE IN THE USA sourcing. If you see a kit with lots of extra parts you might consider one exclusively designed for your truck.Some lower cost competitors may also use cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! Many competitors even use lower cost Rubber Bushings.These arms are precisely the proper length to center your front axle within the wheel well at stock to 1 1/2", 2-3", 3 1/12" to 5" and 5 1/2" to 7" lift height - Each arm is jig-built, using precisely measured materials, and is inspected before being shipped. Buy with confidence! That's correct, Stryker designs and manufacturers a Fabricated control arm to match your truck. In OUR world of Rugged Style ONE SIZE DOES NOT FIT ALL TRUCKS! Stryker is confident in offering you a LIFETIME WARRANTY on our Fabricated control Arms because the Quality of the Engineered Design, Materials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!CAD Designed for your HEAVY DUTY TRUCK.I-BEAM construction for the ULTIMATE in Strength and Durability.1/4" USA STEEL for the confidence you need!Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!Powered Coated in the USA under strict Stryker oversight and inspection.Threaded ZERK fittings for a lifetime of optimal performance!And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work! Comparison This is an example of a Mopar OEM replacement control arm. Stryker design engineers saw room for improvement and designed both our Drawn Over Mandrel (DOM) and our NEW Fabricated High Clearance arms as a true Dodge 1500 2500 3500 Heavy Duty upgraded Control Arm. Stryker's Fabricated Control Arms These are brand new 1/4" USA steel construction, CAD designed, CNC plasma cut, welded on site at at Stryker fabricated control arms for the front of a Dodge Ram 1500 2500 3500 4x4 with stock to 7" lift height. This modified I-BEAM Fabrication is the epitome of Stryker's commitment to RUGGED STYLE! These WILL fit the 1500 Megacab 4x4 as well. Also check out our NEW Stryker Fabricated High Clearance Control Arms for less Tire Rub and IMPROVED TURNING RADIUS!These are brand new 1/4" USA steel construction, CAD designed, CNC plasma cut, welded on site at at Stryker fabricated control arms for the front of a Dodge Ram 1500 2500 3500 4x4 with stock to 7" lift height. This modified I-BEAM Fabrication is the epitome of Stryker's commitment to RUGGED STYLE! These WILL fit the 1500 Megacab 4x4 as well. This is for a set of 4, includes 2 uppers and 2 lowers. If a couple more degrees of turning radius and less Tire Rub captures your attention, you should really consider a HIGH CLEARANCE control arm for your Heavy Duty 1500, 2500 or 3500. And Stryker considers our Brand New Fabricated High Clearance Arms a significant offering consistent with our goal of providing you with Rugged Style! An additional design and material feature that sets ours apart from other competitors? We use DOM tubing in the collars of the arms! Take a look at the sleeve pics. On the left is our Stryker sleeve. On the right is a competitors. We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. These arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness. These are guaranteed! Features:LIFETIME Replacement Warranty! (excludes powder coat)CAD Designed for your HEAVY DUTY TRUCK.I-BEAM construction for the ULTIMATE in Strength and Durability.1/4" USA STEEL for the confidence you need!Daystar PTMEG poly bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!Powered Coated in the USA under strict Stryker oversight and inspection.Threaded ZERK fittings for a lifetime of optimal performance!And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work! NOTE:We also offer custom color options. If you prefer a different color powder coat, please select custom and note your color choice and we would be happy to accommodate, this is a $50 option. We use Prismatic Powders. So if you choose custom, you must go to their website (http://www.prismaticpowders.com/powder-coating-colors/), choose your color choice and provide us with the item # during checkout. Custom color choices could take up to 2 weeks to ship depending on availability of the powder coat. We can do any color you choose.We are always expanding our inventory of powder coat as well. Make sure to let us know which color option you would like during checkout. Kit Contents: (2) Upper Fabricated Control Arms (2) Lower Fabricated Control Arms Fitment: 94-99 Dodge Ram 1500/2500/3500 4WD with 1 1/2" to 5" Lift Height Technical Notes: Re-uses factory hardware (bolts)
Price: 399.95 USD
Location: Maryville, Tennessee
End Time: 2024-09-07T20:30:50.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
OE Spec or Performance/Custom: Performance/Custom
Brand: Stryker Off Road Design
Kit Parts Included: Control Arm
Warranty: Lifetime
Greasable or Sealed: Greasable
Manufacturer Part Number: CRMFAB3594DGTTAABE2
Kit or Single Part: Kit
Lift Height: 3.5" Front
Surface Finish: black powder coat
Country/Region of Manufacture: United States
Placement on Vehicle: Front, Rear, Upper, Lower