Description: Product DescriptionNote:Ceramic material is fantastically wear-resistant but can easily get broken. Don’t drop the ceramic rod or hit it against hard surface.To clean the ceramic surface, scrub in warm water using a mild brush and a kitchen cleansing powder.About SHARPALSharpal Inc. is a leading manufacturer of professional and patented multifunction knife and tool sharpeners for the outdoor and sports, garden and workshop, and culinary and kitchen industries. For more than 24 years we have been passionately researching and developing quality products, which provide consumers with an easy and cost-effective way to obtain a sharp edge.SHARPAL Ceramic Sharpening RodCeramic grit: 3000Rod material: white pure ceramicCeramic rod length: 10 InchCeramic rod diameter: 0.57 InchTotal length: 15 InchHardness: 9 MohsMade of high grade pure 3000 grit ceramicHones and realigns cutting edgeRemovable rubber cap to protect a support surface from scratch as well as to reduce chipping and nicking when dropsSlip-resistant plastic handleOversized hand guard for safetyBuilt-in hole for hangingSharpen most of super hard steel that being used by knife manufacturers includingNon-Stainless SteelsD2, A2, W-2, 10-series (1095, 1084, 1070, 1060, 1050, etc.), O1, Carbon V, 50100-B (0170-6), 5160, CPM 10VStainless Steels420 (420J), 440A (and similar grades including 425M, 420HC, and 6A), 440C (and similar grades including Gin-1, ATS-55, 8A), 154CM (ATS-34), VG-10, S30V, S60V (CPM T440V) / S90V (CPM T420V), 12C27, AUS-6 / AUS-8 / AUS-10 (also 6A / 8A / 10A), ATS-34, BG-42, Damascus SteelKey FeaturesPremium Pure Ceramic MaterialMade of high grade pure ceramic, a material close in hardness to diamond, harder than most of super hard steel that being used by knife manufacturersProtective Rubber CapNote: If use this product free hand instead of having the rod tip supported by table, to prevent rubber cap from being cut away by knife, remove the cap from the rod tipProtect a support surface from scratchReduce chipping and nicking when dropsOver-sized Safety Hand GuardThe hand guard measures 2.2 inches in width to protect hands from hurting by blades.Anti-slip Ergonomic HandleSlip-resistant plastic handleBuilt-in hole for hangingHow to Use1. Position the sharpening rod vertically point down on a cutting board, table or other suitable surface. (See Fig. 1) Apply sufficient downward pressure on the sharpening rod to avoid slip during the sharpening process.2. Angle between the knife blade and sharpening rod should be approximately 20 degrees. (See Fig. 2)3. Place heel of your knife blade at the top of the sharpening rod at approximately 20 degrees. With consistent downward pressure, push the knife downward along the rod while pulling the knife towards you from heel to tip of the knife blade. (See Fig. 3)4. Repeat this action on the opposite side of the knife blade. (See Fig. 4)5. Repeat Step 3 & 4 until knife is sharp. Always take alternating passes with your knife across the sharpening rod applying appropriate pressure. 10 Inch Steel: SHARPAL 117N 10 Inch Professional Kitchen Knife Sharpening Honing Steel Sharpener Rod Restore Blade Quickly Item Dimensions LxWxH15 x 2.2 x 2.09 inchesItem Weight0.66 Pounds Hones and Realigns Cutting Edge – Unlike a knife sharpener that takes off too much of your knife’s edge metal, this sharpening steel rod is used to roll the edge back to its original position and keep it at the ideal angle for maximum sharpness. Regular use extends the life of your cutlery.High carbon magnetic steel-high carbon steel will protect your expensive knives. Magnetic materials can attract tiny metal particles on the blade to keep the blade clean and make it easier to sharpen the knife.The surface of the product uses the latest drawing process. This technology can repair the blade to make the knife as new as it was when it left the factory.The soft ergonomic handle makes your grip more comfortable. Oversized hand guards ensure the safety of the hands. Loop on the handle for hanging. 10 Inch Ceramic: SHARPAL 118N 3000 Grit Professional Ceramic Rod Knife Sharpening Honing Steel, With Anti-Breaking Cap, 10 Inch Item Dimensions LxWxH15 x 2.2 x 2.09 inchesItem Weight0.57 Pounds Ideal for Valuable Knives of HIGH HARDNESS – Made of high grade 3000 grit PURE ceramic, a material close in hardness to diamond, harder than most of super hard steel that being used by knife manufacturersHones and Realigns Cutting Edge – Unlike a knife sharpener that takes off too much of your knife’s edge metal, this ceramic honing rod is used to roll the edge back to its original position and keep it at the ideal angle for maximum sharpness. Regular use extends the life of your cutlery.Removable rubber cap to protect a support surface from scratch as well as to reduce chipping and nicking when dropsAnti-slip ergonomic handle with over-sized hand guard for safety 10 Inch Diamond Coated, Monocrystalline Diamond: SHARPAL 119N Diamond Knife Blade Sharpener (1200 grit) Professional Kitchen Chef Sharpening Stick Rod, Honing Steel (Diamond Coated, 10 Inch) Item Dimensions LxWxH14.96 x 2.2 x 2.09 inchesItem Weight0.66 PoundsGrit DescriptionExtra_fine, fine Maintain your knife: The surface coating is very fine diamond particles (1200 grit). This level of accuracy is ideal for routine maintenance. Compared to other products using carbon steel, the grinding layer is more subtle and smooth, greatly extending the service life of the tool.Suitable for a variety of materials: Diamond is the hardest material in nature, so it can be used to sharpen all kinds of hard material tools that are not suitable for other sharpening materials, such as ceramics, hardalloys, and so on.Safety&Easy to Use: The protective ring on the handle protects your hand. The ergonomic handle makes for a comfortable grip, and the round sharpening bar makes your sharpening process easy and efficient.Storage: Dry the diamond surface when you have finished grinding the knife. We recommend that you put this product in a cool, dry place.
Price: 16.99 USD
Location: Ontario, California
End Time: 2024-08-30T05:57:33.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Features: Manual
California Prop 65 Warning: None
MPN: 117N,118N,119N,
Material: Alloy, Ceramic, Stainless Steel
Brand: SHARPAL
Color: White
Type: Manual Knife Sharpener
Available Variations
Color: Ceramic
Price: 24.99 USD
Available Quantity: 102
Quantity Sold: 10
Color: Monocrystalline Diamond Coated
Price: 22.99 USD
Available Quantity: 100
Quantity Sold: 3
Color: Steel
Price: 16.99 USD
Available Quantity: 100
Quantity Sold: 4