8W Wifi Power Amplifier 2.4GHz Wifi Repeater Router Range Extender Booster

Description: 8W wifi amplifier 2.4GHz wifi booster long range wifi repeater for home NOTE: The item need connect with the Access Point Router together, then it can work and the Access Point Router is NOT included.Your device must be SMA antenna detachable Connector when used it , for example SMA detachable antenna router Please comfirm that you device output power range is between 3dBm and 20dBm,only that the wifi signal booster could work well. AB022 does not come with a power supply. The product supports three types of power supply:12V/1A power supply,5V rechargeable batteryandbattery power. You can choose the suitable power supply according to your needs. (There are many options, please pay attention to the product name when placing an order!) 8W Features: Low-noise receive gain Signal activity LED indicates High Gain, High Value, High Performance Maximum output power of 8000mW by the Booster Plug-and-play, Easy installation, no driver needed Ideal for increase the 2400-2500Mhz frequency devices Increase the effective range and coverage area of your Wi-Fi network Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow The amplified wireless signal may even penetrate complex environments with many walls and obstacles Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only) Specification: Operation Range: 2400-2500 MHz. Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing. Frequency Response: ± 1dB over operation range. Input Power: 3dBm (Min.)-20dBm (Max.). Output Power: 8000mW/39dBm nominal Connector: SMA Receptacle, 50 ohm. Transmit Gain: 16-18dBm nominal. Receiver Gain: 10-12dBm. Receive Noise Figure: 3.0dBm nominal. Operating Temperature: - 40 to 70 degree. Operating Humidity: Up to 95% relative humidity. Material: Cast Aluminum INPUT:100-240V 0.3A OUTPUT:12V 1.5A Installation steps: Step 1: Remove the power supply of the wireless AP/Router Step 2: Remove the antenna of the wireless AP/Router Step 3: Use the standard RG316 feeder to connect the bidirectional amplifier RFIN and the antenna of the wireless AP/Router Step 4: Rotate the antenna to the RFOUT port of the bidirectional amplifier Step 5: Power the bidirectional amplifier first, then power the wireless AP/Router Package included: 1 x WiFi Amplifier 1 x Connector cable 1 x Power supply(Some models not) 1 x Manual

Price: 48 USD

Location: GUANG DONG

End Time: 2025-01-09T07:08:03.000Z

Shipping Cost: 0 USD