Description: OT-C001-090+OT-C001-091 Specifications Engine: Single Cylinder, 2-Stroke, Air-cooled. Cylinder Capacity : 52cc. Fuel Mix: 25/1. Drill Bits : 4", 6" and 8". Bit Length: 31". Safety: Bit Lock. Power: 1.9w/7500rpm Carburetor with Pump. Easy Starting System (Cord Starter). Centrifugal Clutch. Change Bits Quickly and Easily. Weight : 10.35 Kg. (Without Bit). Horsepower: 2.4 Hp Accessories: 3drill Bits: 4", 6" and 8". SKU:OT-ML-263+OT-C001-091 Technical Details: Engine: Single Cylinder, 2-Stroke, Air-cooled Cylinder Capacity : 71cc Fuel Mix: 25/1 Bits : 4", 6" and 8" Bit Length : 31" Safety: Bit Lock Maximum Power: 2.3KW Carburetor with Pump Easy Starting System (Cord Starter). Centrifugal Clutch Change Bits Quickly and Easily Weight : 10.85 Kg. (Without Bit) 72CC/52CC Post Hole Digger Gas Powered Earth Auger Borer Ground w/ 4" 6" 8" Bits Please note: If you only choice 52 cc Engine or 71cc Engine,the package without Drill Bit. Type1:52 cc Engine + 4'' 6'' 8'' Drill Bits Notice:Please Keep the Choke to on Position When the Machine Is in Use!DescriptionThe traditional way of digging a hole with a hoe is time-consuming, labor-intensive, and prone to backache at the end of the process. Advancement in technology has brought about labor-saving and professional digging equipment which is ready to liberate you from the hassle of manual digging. Equipped with a powerful fuel engine, this auger post hole digger digs more efficiently than manual trenching, saving valuable time and making digging a pleasure. Key FeaturesGreat Power: With its two-stroke fuel engine, this digger has a powerful horsepower(1.46kw/2.4hp), which makes it easier and more efficient to dig holes to save more valuable time and make digging an enjoyable experience. Sturdy and Durable: Steel handles and manganese steel alloy drills have high strength and hardness, and are not easy to rust and corrosion. The aluminum gearbox has high-temperature resistance and good sealing. The high-quality plastic engine housing is drop and impact-resistant and protects the internal parts. Ergonomic Design: The ergonomic double handles are wrapped in rubberized covers for a stable and comfortable grip and are also suitable for two people control that is less effort intensive than single control. Good Heat Dissipation: The heat dissipation holes on the engine can effectively dissipate heat to ensure stable operation, reduce noise, and prolong the service life of the machine. Easy to Control: The on/off button and smooth manual starter make it simple to use, so even novices can master it quickly. The digging speed can be adjusted at will by adjusting the force of pressing the throttle switch on the grip to suit different soil conditions. Smooth Running: Smoothly rotating high-speed alloy shaft and enlarged deepened cylinder make it more stable and less noisy when digging holes for your better using experience. Low Fuel Consumption: The high-quality carburetor fully burns the fuel so that the energy can be fully converted, saving you money on fuel. Guaranteed Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. DetailsPrecision Gearbox: It greatly improves torque force and wear resistance, giving it strong hole-digging ability and durability. Single Leaf Drill: One-piece single leaf drills are lighter in weight, faster and more durable than double leaf drills. Output Shaft: The 0.7*1.8inch output shaft is suitable for many sizes of drills for greater versatility and easier replacement. Rubber Mat: Rubber mat reduces the vibration of the engine operation to enhance comfort and stability and extend the life of the machine. Fuel Tank: The large fuel tank, which holds 0.3 gallons of fuel, provides great convenience for extended use without frequent refueling. The translucent design allows you to keep track of the remaining amount in order to replenish in time. ApplicationIt can be drilled in epidermal turf and clay, and can be used for tree planting holes, fence stakes, greenhouse stakes, fiber optic cable pole stakes, tree fertilization stakes, etc. Starting Method1. Turn on the switch.2. Before each start, press the oil bubble to suction oil into the oil pipe.3. When the cold machine starts, close the damper switch first.4. When ignition is heard, pull the start handle 5-8 times.5. Open the damper switch. Drill Installation Steps1. Connect the drive shaft.2. Insert the bolt.3. Put the pin to lock it. SpecificationModel: IE44F-5Material: Steel, Plastic, Rubber, Aluminum, Alloy, Manganese Steel AlloyColor: Orange, BlackEngine Type: Single Cylinder, 2-stroke, Air-cooledDisplacement: 52ccMixed Fuel: Gasoline:Two-stroke Oil (25:1)Ignition System: C.D.I.Power: 1.46kwFuel Tank Capacity: 1.2L/0.3galMaximum Speed: 7500rpmRated Speed: 8500rpmHorsepower: 2.4hpDrill Diameter: 10cm/4inch, 15cm/6inch, 20cm/8inchShaft Size: 1.8*4.5cm/0.7*1.8inchDrill Length: 78cm/30.7inchExtension Bar Length: 30cm/11.8inchEngine Size: 25.5*25.5cm/10*10inchDigger Whole Size: 50*22*36cm/19.7*8.7*14inchDrill Package Size: 80.5*23.5*32cm/31.7*9.3*12.6inchDigger Package Size: 39*36.5*28.5cm/15.4*14.4*11.2inchDrill Gross Weight: 9.5kg/20.9lbsDrill Net Weight: 8kg/17.6lbsDigger Gross Weight: 9.1kg/20lbsDigger Net Weight: 8.2kg/18lbs Package Included1 x Auger Post Hole Digger3 x Drill Bits1 x Extension Bar1 x Fuel Oil Mixing Bottle1 x Funnel1 x Spare Starter1 Pair x Goggles1 x English ManualTool Kit for Assembly NotesThe tank should be filled with a mixture of oil (gasoline: two-stroke oil = 25: 1). Please add butter to the gearbox. It should be used with two-stroke oil rather than four-stroke oil, otherwise accidents will occur. All oils are excluded.Please start the machine by pulling the starter quickly without stopping in the middle. Press the oil bubble a few more times before starting. If there is oil coming in and out of the fuel line, which means oil has been supplied.Do not use on steep slopes exceeding 15°.Please do not drill ice, frozen soil, sandy clay, and sand and gravel mixed soil, or the drill bit will bend easily.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Type2:71 cc Engine + 4'' 6'' 8'' Drill Bits Description The post hole digger is easy to operate with a simple manual start system. The package is equipped with three sizes of drill bits can provide more diversified choices for your work. 2.3kw power and a high speed of 0-300rpm can provide more powerful support for it. It can be widely used to install fence posts, install railings, plant trees and many other lawn applications. Key Features High-quality Material: The post hole digger made of high-strength alloy steel, aluminum alloy, and metal can withstand impact, extrusion, wear, and other harsh working conditions. Moreover, its painted surface has performance of rust prevention and corrosion prevention, which can effectively prolong the service life of the product. Easy to Operate: The product is designed with a simple fuel delivery system with a manual recoil start, allowing the machine to be pulled and started quickly. The switch is located at the easy-to-grip handle, making operation more convenient and comfortable. Large Fuel Tank: The large capacity (3.38 Oz) visual fuel tank allows you to easily track the fuel level and use it for extended operation. Great Performance: The product's precision drive gears greatly increase torque and improve its wear resistance. It uses a two-stroke engine, stable operation, and fewer parts, so you have a good feeling while also convenient maintenance. Efficient Heat Dissipation: The large grille housing provides excellent heat dissipation, speeding up the engine's heat dissipation for smoother and more efficient operation. Powerful Power: The heavy-duty engine can reach a maximum power of 2.3kw, which can provide a high speed of 0-300rpm for the drill. Highly Adaptable: The 0.79inches diameter output shaft can be adapted to different drill sizes. If required, you can purchase more sizes of drill bits for installation. High Safety: The product's power head is equipped with a safety lock function that effectively prevents accidental triggering to increase your safety of use. Details Shockproof Rubber Pad: The shockproof rubber pad at the bottom of the power head can effectively enhance the stability of the product when working so that you can better use and operate it. Dual Handle Design: The design of a dual handle can provide you with maximum leverage and stability when working. Three Digging Bits: The package comes with a 4 inch digging drill, a 6 inch digging drill, and an 8 inch digging drill. You can freely choose the most appropriate one for your work. Application This product is applicable to frozen soil, clay, hard soil, etc. It is very suitable for installing guardrails, installing railings, planting trees and many other lawn applications. Specification Material: Alloy Steel, Aluminum Alloy, Metal, Plastic, Rubber Color: Orange, Black Process: Painting Assembly Required: Yes Cooling System: Air Cooling Number of Cylinders: 1 Auger Type: Bit Starting Method: Manual Start Mode Of Operation: One Person Or Two People Mixing Ratio: The Ratio Of 93# Gasoline To Two-Stroke Engine Oil Is 25:1 Output Shaft Diameter: 20mm/0.79in Applicable Brill Size: 10cm/4in, 15cm/6in, 20cm/8in Weight: 10Kg/22.05lbs Displacement: 71cc/0.004cu in Maximum Power: 2.3kw Speed: 0-300rpm Fuel Tank Volume: 1000ml/33.82 Oz Product Size: 50*30*30 cm /19.69*11.81*11.81 in Package Size: 46*37*33cm/ 18.11*14.57*12.99in Package Included 1 x Machine 1 x Funnel 1 x Oil Bottle 1 x English Instruction 3x Drill Bits: 4", 6" and 8" 1x 12" Extension Bar All Accessories for Installation NotesPlease close the damper before starting the cold machine, and open the damper during normal operation.Before leaving the factory, we added butter to the gearbox. After working for a period of time, please add butter appropriately according to your use frequency.When you are starting, please start quickly. Don't stop when pulling the rope, pull it slowly.Before starting, press the oil bubble several times and check whether there is oil in the oil pipe.When the cold machine starts, please close the baffle first, and then open the baffle for normal operation.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. Type 3:(2.3HP)52 cc Engine + 3xDrill Bits Description:The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts,poles, trees, shrubs etc.Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily fora wide variety of tasks.Ergonomically designed, it is accurate, easy to use and economical.Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.With this tool, you will be able to perform professional quality work.The Earth Auger has a straight through gearbox, unlike models with a side mounted engine,the straight through design is much more robust and less likely to shear gears. Technical details:Engine: Single Cylinder, 2-stroke, air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Bits : 4", 6" and 8".Safety: Bit Lock.Power:1.7W/8500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 11.6 Kg. (without bit). Accessories:3 bits: 4", 6" and 8".Extension Bar: 12".Fuel Mixing Bottle.Tool kit for assembly. Type4:52 cc Engine (No Drill Bit) 52CC Gas Earth Auger Post Hole Digger Garden Holing Fence Post Digging Machine Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1 Please keep the choke to on position when the machine is in use! The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical details: Engine: Single Cylinder, 2-stroke, air-cooled. Cylinder capacity : 52cc. Fuel mix: 25/1. Power: 1.9KW/7500rpm Carburetor with pump. Easy starting system (cord starter). Centrifugal clutch. Change bits quickly and easily. Weight : 10.35 Kg. (without bit).Rotational Speed:8500RPM horsepower: 2.4 HP Type5:71 cc Engine (No Drill Bit ) The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bit length : 31" Maximum Power: 2.3KW Carburetor with pump Easy starting system (cord starter). Centrifugal clutch Change bits quickly and easily Weight : 10.85 Kg. (without bit) Type6:4'' 6'' 8'' Drill Bits only,no Machine 3 bits: 4", 6" and 8". Extension Bar: 12". Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters. Reminder:the Gas Tank of the Pit Digger Has a Vent Hole. If the Oil Is Filled Too Much During Use, the Oil Will Spray out from the Hole. It Is Recommended to Fill 1/3 Full. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.库存SKUOT-C001-090,OT-C001-091+OT-ML-263,OT-ML-319Feature 1Convenient Use,Original size design fits perfectlySurface FinishMade of high quality material* Feature *Creative Design,Durable Material,Beautiful Appearance*Coloras descriptionFeaturesCompact Design and Beautiful AppearanceFeatures 1Stable characteristic, high reliabilityFeature 2GOOD RETURN POLICY2shipping noticeCan not ship to Puerto Rico,Alaska/HawaiiBrandUnbrandedMPNDoes Not ApplyBits4", 6" and 8".SafetyBit LockFits Hitch Category0Country/Region of ManufactureUnknownHook UpDrawbarUnit Quantity1Unit TypeUnitCompatible Equipment Make/Model/On Aug 6, 2024 at 21:24:39 PDT, seller added the following information:
Price: 83.73 USD
Location: Chino, California
End Time: 2024-08-24T03:41:17.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
库存SKU: OT-C001-090,OT-C001-091+OT-ML-263,OT-ML-319
Feature 1: Convenient Use,Original size design fits perfectly
Surface Finish: Made of high quality material
* Feature *: Creative Design,Durable Material,Beautiful Appearance
*Color: as description
Features: Compact Design and Beautiful Appearance
Features 1: Stable characteristic, high reliability
Feature 2: GOOD RETURN POLICY2
shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
Brand: Unbranded
MPN: Does Not Apply
Bits: 4", 6" and 8".
Safety: Bit Lock
Fits Hitch Category: 0
Country/Region of Manufacture: Unknown
Hook Up: Drawbar
Unit Quantity: 1
Unit Type: Unit
Compatible Equipment Make: /
Model: /
Available Variations
Color: 52 cc Engine + 4'' 6'' 8'' Drill Bits
Price: 160.08 USD
Available Quantity: 8
Quantity Sold: 3
Color: 71 cc Engine + 4'' 6'' 8'' Drill Bits
Price: 159.15 USD
Available Quantity: 7
Quantity Sold: 2
Color: (2.3HP)52 cc Engine + 3xDrill Bits
Price: 161.48 USD
Available Quantity: 1
Quantity Sold: 1
Color: 52 cc Engine (Only Engine)
Price: 111.66 USD
Available Quantity: 5
Quantity Sold: 0
Color: 71 cc Engine (Only Engine)
Price: 227.79 USD
Available Quantity: 5
Quantity Sold: 0
Color: 4'' 6'' 8'' Drill Bits (only Bits)
Price: 83.73 USD
Available Quantity: 11
Quantity Sold: 6