6xPack PCI-E Riser 1x To 16x Extender Card Adapter SATA/6pin ETH mining

Description: Main Features :1. Low Power Consumption, 20~50w per riser for Nvidia card, 30w~75w per riser for AMD card. Some other sellers' Bad riser will consume 80-110w per riser,3. Gold plated USB3.0 interface, faster and more stable.4. The switch card can supply the power supply separately, so that the power supply of the developing card is independent from the main board, and the burden of the main board is lighten when the card is connected.5. The graphics card slot adopts the original input connector to make the graphics card contact better.6. PCI-E connector uses multi-layer shielded wire, the longest can be connected to 3m without attenuation signal.7. The wire is soft, the wiring is convenient, the graphics card can be placed at will.8. The slot is fastened with a fixed clip, so it is convenient to disassemble and fix the graphics card so that the card will not fall off from the slot.Attentions:1. It is suitable for the main board PCI-E slot (1X 2X 4X 8X 16X). Please plug in the power cable of the floppy drive when using. When the PCI-E is extended, the wire must be broken and then plugged. When used, please watch the matters of attention.2. The matching wire is custom-made, and must not be inserted into any cable.3. When plug the wire, please recognize the direction, do not insert reverse or insert deviation, prevent burning equipment.4. When inserting the wire, hold the device socket and insert the cable to avoid the excessive force and broken the socket pin.5. SATA15pin is a power standard piece. Please check if it is put in place when the power is inserted. Be careful when the cable is plugged. 6pcs Packing Details：6 x PCI-E 16X Riser Board6 x PCI-E 1X Adapter Card6 x 60cm USB 3.0 Cable6 x 6-Pin PCI-E to 15-Pin SATA Power Cable

Price: 12.99 USD

Location: Farmington, Connecticut

End Time: 2024-11-25T21:10:48.000Z

Shipping Cost: 5.99 USD