6~24V DC, 1~6 GPM Solar Hot Water Pumps - An excellent El Sid replacement pump

Description: D5 Pump Specifications:Max Temperature – 230 F / 110CStatic PSI – 145.0 / 10 BarThreaded FittingsInlet / Outlet – 1/2” x 1/2”Food GradeSpeed Control fully integratedRuns directly from PVThe D5 is a replacement option for the El SID pumpThe D5 is a replacement option for Aqua-Hot hot water pumpApplication:The D5 Pump is a DC brushless motor with energy efficiency technology:Maximum power point tracking (MPPT)Easy variable speed and power consumption dialStable and advanced soft-starting functionVery low in-rush currentPerfect for working directly with a PV panelSoft start-up:The D5 Solar Hot Water Pump has a soft start-up feature which reduces high in-rush current. When the photovoltaic panel provides sufficient power, the pump goes through the alignment phase by turning the rotor into the position required for start-up. The processor then waits until the capacitor is sufficiently charged. This enables a start-up with minimal power (less than two watts). This process minimizes cycling due to unsuccessful attempts to connect. Even after prolonged shutdown, the pump will start reliably.PV operated:For solar system loops, the D5 Solar Hot Water Pump powers directly from a PV panel. The sun comes up, heat builds in the solar hot water panel producing electricity in the PV panel. The pump slowly starts with the smallest amount of current and pushes the heated water to the storage tank. This simple system eliminates the need for controllers, thermostats and sensors.Features:DC brushless motor with energy efficiency technology by micro processorHigh efficient ECM brushless DC motor can sustain a continuous 24-hour workload with life expectancy of well over 20,000 hours.Soft start at very low in-rush current, convenient for working directly with a PV panelDurable permanent magnetic rotor/impeller and fine ceramic shaftAdvanced magnetic drive technology with static-impellerDry-running protection:When drive circuitry detects no or little liquid in the pump chamber, it will stop the pump to prevent damage. Then you can restart the D5 Solar Hot Water Pump manually by disconnecting and reconnecting it to the power supply.Over voltage protection:If the voltage exceeds 28V, the pump will auto-protect and shut off the power supply. When the voltage falls below 28V, the pump will restart automatically.Overload protection function:When the current exceeds the rated current, such as can arise when the impeller jams due to debris, the pump will automatically stop to prevent damage. The pump will restart when the current returns to normal.Areas of Use for the D5 Solar Hot Water Pump:Beer BrewingLiquid TransferSolar Water HeaterHot Water CirculationRadiant Floor HeatingAir Energy Water HeaterPortable Power SuppliesHot Pump Air Conditioner

Price: 287 USD

Location: Falls, Pennsylvania

End Time: 2023-12-11T22:47:51.000Z

Shipping Cost: N/A USD