50W Mini Aquarium Heater for 1-10 Gal Tank, Fish Heater with External Controller

Description: Store New Arrivals Add to Favorite View Feedback Contact 50W Mini Aquarium Heater for 1-10 Gal Tank, Fish Heater with External Controller & LED Temperature Display, Adjustable Submersible Betta Fish Tank Thermostat (68-93°F) 50W Mini Aquarium Heater for 1-10 Gal Tank, Fish Heater with External Controller & LED Temperature Display, Adjustable Submersible Betta Fish Tank Thermostat (68-93°F) ★PULACO 50W heater: The heating device is made of heat-resistant quartz glass, explosion-proof and strong thermal conductivity. It can be used for 1-10 gallon glass or acrylic fish tanks.★Easy to operate: This heater is different from traditional heaters. It is designed with an external controller for temperature display and temperature adjustment, which can freely adjust the temperature you need (68°F-93°F).★Intelligent temperature control: The heater effectively maintains the temperature you preset before, and stops heating when the water temperature reaches the preset temperature, and restarts heating when the water temperature is lower than the preset temperature by 2-3°F.The red light on the LED screen indicates that the heater is heating, and the blue light indicates that the heater has finished heating and is in a constant temperature state.★Note: Do not operate or leave product plugged in when your water tank is out of water, heater should be fully submerged into water. It is better to install a water pump to help water circulating while heating.★SATISFACTION GUARANTEED: Our Aquarium Heater is built with durability in mind and safety for every design. In the remote possibility that you’re not satisfied with our product, just contact us, and we will gladly give you a new Aquarium Heater replacement. 12 Month Warranty and 24 Hour Professional After-sales Service. Product Description PULACO Your Creative Aquarium Mate ! PULACO provides you with quality Aquarium services. We are committed to being the best Aquariums store you can trust. PULACO Aquarium Heater 50 Watt How to use the external controller: Plug in, the controller LED lights on, press the button and switch it continuously until the LED display shows your expecting temperature (From 68~93℉ ), and wait 3 seconds for system confirmation, then heater will start heating up to your preset temperature.Red lights means the heater is on heating mode, when heater heating up to the preset temperature, blue lights on, and heater will stop heating (Restart heating when temperature less than preset temperature) Operation for example: Plug in and LED display shows preset temperature 68℉, you want adjust it to 78℉, then press the button 10 times continuously, LED display will shows 78℉, and wait 3 seconds flashing, then setting fishined, heater will start heating from 68℉ to 78℉. Maintenance: This heater is free maintenance item, for the good of heater function and service life, we suggest: Check the heater working status regularly, if any strange signs,please plug off immediately.Clean the heater suction cups regularly (3 months)with 140℉ warm water and soak it for a while.If you found any soil or moss things covered on the heater, please plug off the heater and clean it with fresh water after a few minutes later, especially the heating part stains. Do not use any other liquid to clean the heater, it may damage the heater Cautions: Please install and use this heater under rated voltage conditions(110V-120V/60Hz).This heater is designed for small fresh/sea water tanks, please do not use it in chemical water or any other heating purpose, it may damage the heater.Children should be use this heater under adult's guidance.IPX8 design, non-detachable, do not disassemble it, otherwise it will damage the heater.To ensure the heater normal functions and safety concerns, heater should be fully subermerged.Fish tank temperature is very easy to affected by the room temperature, therefore it makes the water temperature inaccurate, normally ± 3℉ differency.To help the heater works more efficiently, please use the heater in a circulating water tank, still water will make the heater area water temperature higher than other side. External Controller External LED temperature display and Touch button, cyclic adjust temperature , easy to use and Safety. Quartz glass heater The heating device is made of heat-resistant quartz glass Specification Power : 50Watt Voltage: 110-120V/60HZ Cable Length: 5.0 ft Product Dimensions: 0.8 inches x 3.9 inches x 0.8 inches. Weight: 5.29 oz About Us Our vision is to be eBay’s most customer-centric store, where customers can find and discover anything they might want to buy online, and endeavors to offer its customers the lowest possible prices." "Our mission is to serve consumers online and focus on selection, price, and convenience." #Find it, Love it, Buy it Payment policy We currently accept payment via eBay managed payment only. Once payment is cleared, We will dispatch your shipment with 1-3 business days. Please refer to the "Shipping" tab for more information regarding shipping speed to your destination. Shipping policy 1. We offer FREE shipping on all orders! 2. We ship within three business days of payment, usually sooner. 3. We use a selection of shipping services such as UPS, FedEx, USPS etc. 4. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. 5. Local pickups and combined shipping options are not provided at this time. Returns We are committed to your happiness. That’s why we offer a 30-Day Return Policy on items that you are not completely satisfied with. You have the option for a refund or an exchange of the item.

Price: 23.11 USD

Location: Denver, Colorado

End Time: 2024-02-17T15:58:29.000Z

Shipping Cost: 0 USD