50g+50g Vintage Bronze+Aluminum Metallic powder gold+silver pigment paint shiny

Description: Lot consists of 1 package 50g bronze powder + 1 package 50g silver powder Bronze powder is a dispersed powder obtained by joint grinding of brass, bronze and copper with the addition of stearic acid or paraffin, excluding sticking and oxidation of powder particles. Bronze powder BPK (for paints) is the brightest; granulometry: sieve residue 0.1mm - 5-8%, gold color COMPOSITION: Bronze Copper (Cu),% 84-85 Iron (Fe),% 0.2-0.3 Fat,% 0.2-0.3 APPLICATION 100 g Dilute bronze powder in 2 kg of varnish or drying oil. Stir until smooth. Treat the surface to be painted. It can be applied to any prepared surface: metal, gypsum, wood, cardboard, paper, plastics, plaster, etc. Apply the resulting solution with a brush or roller to the surface to be painted. To obtain a more saturated shade - add powder and mix, or add varnish (drying oil) to obtain a less saturated shade. The degree of adhesion and strength of the coating depend only on the bonding element used. The bonding element for metal powders can be all types of varnishes, many types of adhesives, epoxy enamel, etc. One thing is important - the connecting element must be transparent or translucent. The higher the concentration of powder in the varnish, the more it will look like real silver or bronze. The optimal consistency will be reminiscent of thick sour cream (up to 40% by weight). The embossed product can be given the effect of an old bronze (patina effect). A layer of powder with a binder is applied to the product in any way, then the product must dry completely. Cover the product with liquid bitumen varnish or stain (pigmented glaze (grisal)), so as to fill all the recesses of the relief. Without letting the varnish / paint dry, the product must be wiped with a dry, clean cloth on convex surfaces. It is better to use a sponge or a well-absorbing cotton cloth, wipe all relief surfaces with light blotting movements, in the largest grooves only varnish beads are removed. Dry excess can always be removed with a solvent. The product is not used until completely dry. If necessary, you can tint the convex parts of the sculpture with bronze powder for the effect of a polished surface. In the same way, you can achieve the effect of old or "blackened" silver with aluminum powder. For this type of treatment, black artistic oil paint (for example, "gas soot"), liquid diluted in turpentine, can be used. The paint is diluted to the consistency of liquid cream. You can use another composition: add a little printing ink to the oil varnish. Today there are many materials for creating a patina effect: special wax paste, latex glaze coating, stains, translucent paints, etc. For an oxidized bronze effect, use green over brown or gray paint. Finally, when the varnish is still not completely dry, you can gently spray talcum powder over the surface of the grooves to remove the gloss. What color to use, how much to darken the bronze depends on the artistic goals and taste, therefore all the recommendations given are relative and are only for advice. Metallic powders can be mixed to achieve different artistic effects. ATTENTION: getting aluminum or bronze powder into the bronchi and lungs is dangerous to health. Metal powders can cause allergic reactions. Powder easily moves with air currents, so you should beware of drafts. It is recommended to use a mask or respirator when working with powder. Aluminum powder of the times of the USSR (year of manufacture 1971) PAP-1Aluminum powder is known as silver (serebryanka). It is a silvery powder that must be diluted with either varnish (dries quickly) or linseed oil (dries longer) to obtain a liquid dye for application to various surfaces.Such a powder consists of small plates, which are covered with a layer of fatty substance in production, which gives them properties acceptable for further use. The powder itself has a light silver tint, which, when diluted with linseed oil or varnish, does not change and does not become less intense.In the household sphere, people most often use it in order to give an attractive appearance to their metal and wooden interior and decor items. After diluting the powder with linseed oil or varnish, a paint and varnish product is obtained, which is easily applied to the surface of the product.If they handle things that are inside the premises, this will not adversely affect human health. In everyday life, aluminum powder is also used to paint the facades of houses and fences.Aluminum powder is also used in industry. It is most commonly used to extend the life of equipment made of corrosive metals. Thanks to it, a dense film forms on the surface of metals, which prevents the ingress of moisture and oxygen.The consumption of aluminum powder is on average one hundred grams per square meter, if applied to the surface in one thin layer (at least 2 layers are recommended)Hiding power on water, cm2 / g, not less ... ... 7000GradingRemaining on sieves,%, not more (mesh numbers according to GOST 6613) +008 ... .... 1.0Impurities, no more:iron 0.5silicon 0.4copper 0.05manganese 0.01moisture 0.2fat additives 3.8Floating ability,%, not less than 80From the powder, you can prepare both a regular mixture and a heat-resistant one - it all depends on the varnish or drying oil, which you will take as a basis.In addition to protective properties, silver has a unique, characteristic color, really similar to silver. However, with the help of different pigments you can get not only this color, but also other, more original metallic shades.How to make silver paintIt should be borne in mind that the ready-made solution is a very corrosive substance, therefore, before preparing the silver paint, select a container that you definitely will not need - you can also store the ready-made mixture in it.We mix the componentsFirst, you need to pour the powder into the container, and then pour in the varnish in small portions and mix. So that you get a single mass without lumps. For a good result, stir for a long time and thoroughly, at least 10 minutes.Proportions - 1 part of aluminum powder to 3 or even 4 parts of varnish or drying oil. It all depends on what intensity and color you plan to get.When you combine the ingredients, you get a thick mixture. The paint must be brought to the desired consistency, depending on the method of application (brush, roller, spray). For this, one used or a mixture of solvents - white spirit, turpentine, solvent.If the surfaces are painted with a special spray gun, then it is necessary to use drying oil and aluminum powder in a 1: 1 ratio.You can also dilute aluminum powder with synthetic linseed oil. The proportions will not be very different, so you can use the same as for varnishes.When diluted, a rather interesting silver color is obtained.Before applying, you need to clean the surface from rust and degrease it. Thus, the service life will be greatly extended.Silver decoration transforms plaster and plastic moldings into exquisite works of art casting masters, gives respectability to simple wooden frames and modest moldings, returns the lost shine and luxury to elements of antique furniture and decor.Cover the silver with resin - make a masterpieceSilver and bronze paint is used to create decor. To do this, it is enough to paint the selected item with a brush, apply 2 layers. After complete drying, a polyester resin is applied on top. Metallic powder takes on the appearance of real silver or gold. The glossy appearance remains for a long time. After about 3 years, the resin coating is renewed.ATTENTION: getting aluminum or bronze powder into the bronchi and lungs is dangerous to health. Metal powders can cause allergic reactions. Powder easily moves with air currents, so you should beware of drafts. It is recommended to use a mask or respirator when working with powder. Combined shipping is accepted. Contact me via message for any question Shipping time - 10-30 daysItem will be shipped immediately after payment. Thing will be securely packed. Delivery from Ukraine by postal service. Thanks for looking!

Price: 12 USD

Location: Vinnitsa

End Time: 2024-11-08T07:40:34.000Z

Shipping Cost: 10 USD