400W Speaker Crossover 2 Way High-Low 4-16 Ohm Frequency Divider for Speaker Q8E

Description: 400W Speaker Crossover 2 Way High-Low 4-16 Ohm Frequency Divider for Speaker Q8E Jumper A, B are used to control audio effect of bass range. A for lower limit while B for limit of the bass audio range. For speakers, when Bass is turned up too much, the speaker will show distortion.When that happens: we remove the jumper cap of jumper A to limit super low Bass to bring distortion lower. When we remove the cap of jumper B, Bass is increased while cap of Jumper B is on, Bass is decreased. Jumper C and D are used to control range. When cap of both jumper C and D are on, the sound of is loudest.When only cap C is on, the sound is lower. When only cap D is on, further lower. When both of C and D are removed, there is no sound. (Generally speaking, with the four , you'd sooner or later find your best sound effect. Anywya, all effects still on your actual test.)How to use the splitter board:First connect as per above (, Low, Input), connect to speaker, seal air gap, begin to hear music while optimize. Normally we use jumper A and let B idle. For jumper C and D: we need to hear the actual effect of . A general formula is: A+D = better Bass; A+C = clear and Bass; A+CD = clear and Bass (the overall effect inclined towards ); AB+CD = more mediant frequency. When Bass effect is unnecessarily high, remove cap A. optimize the sound is best, and then fix the board with your speaker unit. Power: 400W or lowerResistance: 4-16ohmFrequency: Adjustable Colour: motherboard redMaterial: ABS + metalSize: 7*5*2.5cmPackage Contents:1 * Frequency Divider

Price: 8.35 USD

Location: Shenzhen

End Time: 2023-10-24T08:45:52.000Z

Shipping Cost: 0 USD