3pcs FD-4615 Fuel Filter For 11-16 6.7L V8 Diesel F250 F350 F450 F550 BC3Z9N184B

Description: FD-4615 6.7 Powerstroke Fuel 5 Micron Fuel Water Separator Filter Replacement for Truck/Pickup 2011-2016 F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines BC3Z9N184B Product Description Package:3 Packs (1 Packs includes Two filters: one engine mounted filter and the frame mounted filter, and one gasket/o-ring for the frame mounted filter). Fit: 2011-2016 F-250, F-350, F-450, F-550 Super Duty 6.7L V8 Diesel Engines. Interchanged part number:FD-4615,BC34-9N184-BA,BC3Z-9N184-B, BC3Z9N184B,L4615F,33615,FF1223,K10826,BF9895. Be careful when removing the lower filter housing the first time. Use both a box end wrench on the nut and a strap wrench on the body the first time. Then grease the O-ring and you will be ok after that. The micron of this filter is 5.Every 20-22k miles,these need to be changed. Compatible with these models: F-250 Super Duty Pickup - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016 F-350 Super Duty Chassis - V8 406 6.7L D.I. Diesel (VIN T) 2014-2016 F-350 Super Duty Pickup - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016 F-450 Super Duty Chassis - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016 F-450 Super Duty Pickup - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016 F-550 Super Duty Chassis - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016 F-650 Base Straight Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016 F-650 Base Tractor Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016 F-750 Base Straight Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016 F-750 Base Tractor Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016 Fuel filter element Diesel Fuel Filters are highly efficient in filtering diesel fuel system contaminants to meet modern dieselâs engine demands for optimum fuel flow which ensures the system is free of contaminants and water.Parts are manufactured from first-quality materials - chosen specifically for maximum performance and application suitability.5 micron,98% water separation efficiency.Effectively filter impurities. Up Engine filter Perfect connected plastic module will not be separated,excellent tightness.The fuel line and the buckle towards to the same direction. Changing frame rail filter Remove sensor harness, and lossen filter housing with a 1 1/4" socket or 32mm or use a strap wrench. I highly recommend a strap wrench so you don't shear the plastic housing. Turn 3 TIMES (before opening the drain valve as to not drench yourself in fuel) then losses yellow drain valve and drain into suitable container. Remember to lube new o-ring and re install everything. Changing engine filter Remove the fuel line keepers on both lines and by pushing down the yellow tabs and the keeper will go down out of the way, the other fuel line will come off by squeezing both white tabs inward then remove. Loosen the 7mm nut use a 7mm socket wrench to loosen the clamp around the filter, twist to the right until it stops then pull upwards, and install following the same steps in reverse order. When all done with both filters: You must cycle the key to the on position 6 times waiting approx 30 secs each time before trying to start truck.Turn ignition key to on, but do not start. Wait 30 seconds until the fuel pump times out, then turn the key back to off. Repeat 6 times. You will probably notice strange noises coming from the fuel system until it is mostly full.

Price: 49.49 USD

Location: Walton, Kentucky

End Time: 2024-09-10T21:50:03.000Z

Shipping Cost: 0 USD