3d printed - WillTravel 4x10 camera for your focal length

Description: My 3d printed WillTravel camera design in 4x10 - shown in 180mm focal length. Other focal lengths available, see below and ask me. Please read the entire description. The WillTravel camera design is a fixed focal length on the groundglass manually focused or zone focused lightweight camera design. The camera design is symmetrical allowing for both left and right hand use. Integrated into the camera body is 2 x 3 coldshoe mounts for accessories like rangefinder, viewfinder etc. The camera body has 3 metal 1/4-20 tripod adapters and 3 bubble spirit levels. The camera back allows for the standard 4x10 double sided filmholder which slides in under the groundglass. Focusing is done by rotating the frontcap to desired distance or using the groundglass for correct focus composition. Instruction on how to set up the zone focus scale is provided. Frontcap pitch is set so that one turn focuses from infinity and to a few meters. Shown lens is the Fujinon 180mm W f5.6 (old design, inside letters, which covers 4x10), the design will accommodate any lenses which covers 4x10 of focal lengths 180mm and shorter. I have tested successfully with the Super Angulon 121mm f8, and not so successfully with Super Angulon 90mm f5.6 (no coverage in the corners, see last image) , although rumor has that it will cover when focused at hyper focal distance and not infinity. Both the 121mm and 180mm camera with lens weighs in well below 2 kg! In order to prepare your camera, I need to know the lens you are planning you use it with. This to tailor the height of the frontcap to the lens Flange Focal Distance (FFD). Please ask. I have camera design in the following configurations:8x10 - 90 (see note above), 121, 180, 210, 240, 250mm. (See separate listing)4x10 - 90 (see note above), 121 and 180mm. Other focal lengths on request.4x5 - 47, 58, 65, 75, 90, 105, 110, 120, 135, 150 and 180mm. (See separate listing)5x7 - 75, 90, 110, 120/121, 135, 150 and 180mm. (See separate listing) What you get is:WillTravel 4x10 - (your focal length) mm camera including;Groundglass frame with acrylic ground glass.Custom FrontCap and internal funnel for your lens. Grip and bungee cord according to your preference of either black (default), red or orange.You need to have the skillset and tools to mount the lens to the camera, this is similar to mounting it on a lensboard. And you also need to mount a internal stopper with 3 M3 screws to ensure that your lens stays on the camera during use. Full online instructions are provided. Need an affordable 3d printed Viewfinder? See my other items for sale.Do you want to use a M65 Helicoid to focus? Ask me. The camera parts is printed in PETG. Camera body is painted with flat black paint internally. Color of hand grip and bungeecord based on availability. Currently black, red and orange is available. Please specify any color preference. Also note that its a 3d printed camera, thus it will be fully functional but might have minor surface "defects" / artifacts from the production process. Buyer are responsible for all customs and VAT fees. European buyers, Norway is not part of the EU inner market, thus you should expect to pay VAT and any applicable fee. Shipping is for tracked and signed for shipment world wide, similar to EMS. NB; Lens, filmholders and tripod shown for illustration only, and thus not included :-)

Price: 225 USD

Location: Kongsberg

End Time: 2024-10-08T19:41:40.000Z

Shipping Cost: 55 USD