3.5 inch TFT LCD Display Module Shield Touch Screen with Touch Pen for Arduino

Description: 3.5 inch TFT LCD Display Module Shield Touch Screen with Touch Pen for Arduino Description： This is a 3.5 inch TFT LCD expansion board. This display has a controller built into it with RAM buffer, so that almost all work is done by the TFT. It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy. With GPRS module, you can design your DIY phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Package included: 1 X 3.5 inch TFT LCD Touch Screen 1 X Touch Pen NOTE: This screen is 3.3V and cannot be used in direct connection with U.NO R3 (5V). To use it, you need to change U.NO R3 5V to 3.3V. See more in the flyfuntech20223.5 inch TFT LCD Display Module Shield Touch Screen with Touch Pen for Arduino3.5 inch TFT LCD Display Module Shield Touch Screen with Touch Pen for Arduino Description: This is a 3.5 inch TFT LCD expansion board. This display has a controller built into it with RAM buffer, so that almost all work is done by the TFT. It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy. With GPRS module, you can design your DIY phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. - Can use it directly to display characters, graphics and BMP format images with the help of Micro SD card adapter module. - Compatibility: Because the logic level is 3.3V, it is compatible for board 3.3V, you generally need to add a level conversion circuit if you use a 5V Board compatible for Arduino. - Touch screen type: resistive touchscreen. - Touch Pen: length is 9cm; - Resolution: 400 x 240, 16-bit (262,000) color - Display size: 3.5 inch; - Operating voltage: 3.3V; - Logic level: 3.3V; - Operating current: the maximum is 135mA - Bus interface: 8080-parallel interface (8 bit) - IO Port Package: PAD is available, and the pin pitch is 2.54mm. - LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day. - Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor NOTE: This screen is 3.3V and cannot be used in direct connection with U.NO R3 (5V). To use it, you need to change U.NO R3 5V to 3.3V. Package included: 1 X 3.5 inch TFT LCD Touch Screen 1 X Touch Pen See more in the flyfuntech2022PaymentShippingDelivery timeReturn PolicyContact usPaymentPlease kindly make payment asap, so that we can arrange your order promtly. If you have any problem with payment, please feel free to contact us. ShippingWe provide tracking number for ALL orders. You can track your parcels. Delivery timeNormally it arrives in 10-15 business days to US and European countries. DHL /Fedex/UPS arrives in 7-8 business days. Return Policy1.All products are eligible for 30-days money back guarantee. 2.All returns should be guided by us. Please contact us for details before you return anything. Contact usPlease don't hasitate to contact us BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.We accept dropshipping, bulk orders and customized products. We are selling forArduino module, sensors, Nextion display and other oled or lcd screens. lidar range finder sensors, servo motors, various electronic components and for legoled, ect. BrandUnbrandedMPNDoes not applyCountry/Region of ManufactureChinaUPCDoes not applyModelKZ0039TypeTFT LCD DisplayTouch Screen3.5 inch

Price: 13.49 USD

Location: Shenzhen

End Time: 2025-01-27T09:21:40.000Z

Shipping Cost: 0 USD