Description: 5V-32V Input to 6V-48V Output Adjustable Boost Step Up XL6009 Converter Power Supply Module 2 Pieces This versatile DC-DC variable output boost power supply / converter module accepts an input voltage from 5V to 32V and boosts it to any level from 6V to 48V (output voltage must be greater than input voltage). Based on the second-generation XLSEMI XL6009 chip, it offers higher efficiency and superior performance than older first-generation LM2577 solutions. Features:Wide input voltage: 5V - 32V Fully adjustable output voltage: 6V - 48V adjustable with onboard potentiometerEfficient MOSFET switching enables efficiency up to 94%High switching frequency of 400KHz for low ripple and fast response timeSpecifications: Non-isolated step-up (Boost)Input voltage: 5-32VInput Current: 4A (Max), No-load 18mAOutput voltage: 6-48V continuously adjustable (Output voltage must be greater than the input voltage)Output current: 2.5A (Max)Output power: Natural cooling 15W, plus heat sink 25W (Max)Conversion efficiency: Up to 94%, varies with input voltage, output voltage and currentOperating temperature: Industrial grade -40 C to + 85 C (If ambient temperature exceeds 40 C, power should be derated or additional heat sinking or forced air cooling used)Full load temperature rise: 45 COperating frequency: 400khzVoltage regulation: ± 0.5%Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation: ± 0.5%Voltage Regulation: ± 0.5%Short circuit protection: None (Please install fuse or protection circuit input)Input reverse polarity protection: None, please use a reverse protection diode in series with the inputInstallation: Two 3 mm mounting holesDimensions: 48mm x 23mm x 11mm LxWxH (1.9 x 0.9 x 0.4 inches)Weight: 13 gramsOperation: The 5V to 32V DC input voltage is connected to the solder pads labeled IN+ and IN-. The output voltage is connected to the load via the OUT+ and OUT- solder pads. Set output voltage using a voltmeter and onboard potentiometer before installing in your circuit. This is a Step-Up (Boost) converter, therefore the output voltage must be greater than the input voltage. For example, if the input voltage is 10V, the minimum output voltage will be about 11V. Package Includes: 2x (2 pieces) 5V-32V to 5V-48V Adjustable Boost XL6009 Step Up Converter Power Supply Module
Price: 4.99 USD
Location: Duluth, Georgia
End Time: 2024-08-15T22:35:25.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Maximum Voltage Output: 50 V
Maximum Current Output: 2.5 A
MPN: xl6009e1DC
Country/Region of Manufacture: China
Adjustable Power Supply Type: Switch-Mode Power Supply (SMPS)
Number of Channels/Outputs: 1
Brand: Miniduino
