2_Cool_Custom_RC Arrma Limitless V2 Long Spool Direct Drop In, No Spacers Needed

Description: This is a ( 2_Cool_Custom_RC ) ( 32mm ) Titanium Long Spool, CNC Machined And Made Specifically For The Arrma Limitless V2 Chassis. This Spool Consists Of An 8mm Titanium Long Spool Shaft With 7 x 16 x 5mm High Speed Hybrid Ceramic Ball Bearings Abec-9 Rated Between 70,000 to 90,000 RPM And Hardened Steel Cups. This Spool Is Direct Drop In No Need For Any Spacers. ( FYI ) This Long Is Meant For The Original Limitless V2 Chassis or Similar Aftermarket Carbon Fiber Chassis with Original Specs Only. If This Long.Spool Is Used On Aftermarket Flat Carbon Fiber Chassis The Spool May Fit To Tight Due To The Specs Not Being The Same As The Original Chassis. If You Need A Spool For Your Aftermarket Carbon Fiber Flat Chassis. Feel Free To Message Me On Instagram at: @joey2cool or Facebook Messenger Under: Joseph Angel Diaz or WhatsApp: Joseph A Diaz. I Would Be More Than Glad To Help You Out With Your RC Needs. ( IMPORTANT BEAFORE ADDING ANY LOCTITE TO THE SET SCREWS AND CUPS MAKE SURE TO CLEAN THEM WITH ALCOHOL OR ACETONE TO REMOVE ANY RESIDUE LEFT BEHIND FROM THE BLACK OXIDE PROCESS) Also Before Installing The Spool For Longevity Make Sure To Add 2 to 3 Drops Of Speed Oil To The Ceramic Bearings. These Bearings Are High Speed Hybrid Ceramic Ball Bearings Abec-9 And Come Dry From The Factory, Also Before Installing The Spool Make Sure To Add 1 Small Drop Of Red Loctite #262 or #271 To Each Set Screw. It Can Always Be Removed With A Heat Gun, Soldering Iron or Soldering Torch. Let The Loctite Set For At Least 24hours Before Running It So That It Has A Secure Bond. These Are Custom RC Parts And Due To The Nature Of The Hobby And Stress And Torture We Put These Parts Through There Is No Warranty Unless There Is A Manufacturing Defect Keywords: Arrma Limitless, Infraction, Felony, Typhon, Senton, Mojave. Takes Saga Gears 8m, 1/8, 1/7 Scale

Price: 60 USD

Location: La Puente, California

End Time: 2024-10-16T21:55:01.000Z

Shipping Cost: 0 USD