2.85mm(3mm) PA6-GF Nylon Filament 2.85mm Grey, 2kg Glass Fiber Nylon Filament...

Description: Polymaker PolyMide PA6-GF Nylon 3D Printer Filament Key Product Features: Glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion Consistent color and dimensional accuracy realized with CCD line sensor technology; Carefully winded and dried and vacuum-sealed in a resealable ziplock bag with desiccant Printing Setting: Nozzle: 280˚C- 300˚C; Bed: 25-50˚C (Do NOT exceed 50 ˚C); Speed: 30-60 mm/s; Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA; Annealing: 80℃ for 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model). Tips: Please pass the filament through the fixed hole to avoid tangles after use. We recommend switching to an abrasion-resistant nozzle such as a hardened steel nozzle. PA6-GF Filament is moisture sensitive, so please do keep your filament in a dry box when printing and put your filament back in the resealable bag when not using it Specs: Material: Nylon6 + Glass Fiber N.W: 500g / 2kg Filament Diameter: 1.75mm / 2.85mm Dimensional Accuracy: 70% is within +/- 0.01, 97% is within +/- 0.02, 99% is within +/- 0.03, 99.9% is within +/- 0.04 ♥We promise to offer the best purchasing experience. Feel free to contact us via Amazon when you need help, and we will reply within 24 hours. About Polymaker - Simplify Creation Polymaker is an international team passionate about 3D printing. We produce the absolute best 3D printing materials by controlling every stage of production. With a diverse portfolio of materials ranging from high-performance plastics to unique aesthetic solutions, Polymaker will continue to add cutting-edge materials to its ever-growing portfolio. 🦾 【Stiff & Strong & Heat Resistant Nylon Filament】 - Polymaker PolyMide PA6-GF nylon filament 2.85mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion 👉 【Wide Application】 - PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles 🧵 【Tangle Free & Resealable Bag】 - Our glass fiber filled nylon filament 2.85 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue ⚙️ 【Printing Setting】 - Nozzle: 280-300 ˚C; Bed Temperature: 25-50 ˚C (Do NOT exceed 50 ˚C); Speed: 30mm/s – 60mm/s; Annealing: 80℃ 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA ⚠️ 【Note】It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so

Price: 159.71 USD

Location: Lathrop, California

End Time: 2024-12-09T09:26:52.000Z

Shipping Cost: 0 USD