Description: Safety Instruction1.For security, please read the user manual carefully before initial operation;2.Please be sure the power is off before connecting, the product is produced without fuse;3.This system must not endanger life or property during the running failure or its security riskshave been eliminated.SpecificationWorking voltage: 12-265V AC/DCLoading capacity: 1.5WWeight: 156gFlashing frequency: 1HzInstallation method: Vertical/horizontalWorking temperature: -20°C~+60°CProtection level: IP54Size: 60*85mmMutiple Voltage Flash LampAntenna This is used to extend the effective distance of controller Waterproof and dustproof It is made of plastic material IP 54 .wide range of uses:Garage doors, Electronic gates, Barrier gates, sliding doors, automatic doors, rolling doors, shuttersElectrical appliances/Home automation i.e. lights, Alarm system, access control systemNotice:1,Terminal 1 is for connectino thepower input; working voltage is 12-265VAC/DC.2,Terminal 2 is for connecting the antenna of RF controller to extend the effective working distanceInstruction:After power the lamp on, LED will start fashing in 1HZ(default setting).sW1 is the switch for selecting flashing or on mode of the lamp.CAP short connectsthe 2 pins; the lamp is in flashing mode. Remove the CAP from 2 pins, the lamp is inon mode.Be Careful, the whole board includes the components are with high voltage. Alwaysmake sure power is off before you open the coverInstallationOpen the package; take out the products and all the accessories. Removing the antenna by rotatinganticlockwise.Mark 2 holes on the wall by using the fixing hole of bracket.Drilling two 6mm diameter holes and one 10mm diameter hole. Then put the expansion plug intothe 6mm diameter holes. Put the wires through 10mm diameter hole.Put the power wire and antenna through the cable holes in the holder. And fix the holder to thewall by provided 4mm*30mm self-taping screws.Connect the wire and antenna to the correct terminals.Put the cover back and make sure the cover is fastened with the bottom base without any gap.Then screw the antenna up and turn clockwise to make it tight.Always install the holder and lamp upright to the ground. Horizontally installation may cause therain go inside the lam and damage the board.
Price: 15.19 USD
Location: 深圳
End Time: 2024-09-20T09:18:07.000Z
Shipping Cost: 1.99 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Maximum Door Weight: flashing light
Power Source: Electric
Custom Bundle: No
Items Included: 1X antenna, 1X flashing light, 2X screw,, 1X English Installation Manual
MPN: Does not apply
Maximum Gate Size: 68*120mm
Smart Home Compatibility: flashing light
Unit Type: Unit
Horse Power: 0
Manufacturer Warranty: 1 Year
Voltage: 12-265V AC DC
Item Height: 120mm
Maximum Gate Weight: 300 lbs
Style: Modern
Features: wired
Unit Quantity: 1
Item Width: 68mm
Maximum Door Size: 68*120mm
Bundle Description: 1x24V-265V AC DC flashing light
Brand: Flash
Mounting: Wall Mounted
Type: Gate Opener
Model: flashing light
Country/Region of Manufacture: China
Application: Resindential
Smart Home Protocol: 12-265VAC/DC
Item Weight: 0.15kg