2 X 72 Inch Non-Woven Surface Conditioning Sanding Belts

Description: 2 X 72 Inch Non-Woven Surface Conditioning Sanding Belts Our premium-quality industrial-grade belts are long-lasting and produce a great finish for irregular steel, stainless steel, and aluminum surfaces. 2” x 72” Non-Woven Surface Conditioning Belt Product Details Available in 1 pack and 3 packs. Assorted grits pack contains 1 each of coarse, medium, and fine grit belts Resin bonded aluminum oxide grain evenly dispersed on open web nylon mesh fibers delivers consistent results Flexible, low stretch material with reinforced backing resists loading and heat build up for maximum belt life Grit Equivalents Of Our Surface Conditioning Belts Non-woven belts aren’t rated by grit, because there technically isn’t any grit on the belt. Nevertheless, you can expect certain surface conditioning belts to work similar to certain grit sizes. Below are the grit equivalents of our surface conditioning belts. Coarse (Brown) is equivalent to P120-P150 Medium (Maroon) is equivalent to P150-P180 Fine (Blue) is equivalent to P240-P280 Super Fine (Grey) is equivalent to P1000-P2000 What Are Surface Conditioning Belts & What Are They Used For? Non-woven belts and surface conditioning belts are terms used interchangeably that refer to the same type of belt. Surface conditioning or non-woven belts are used to deburr, clean, blend, and finish contours, edges on irregular aluminum, stainless steel, or steel surfaces. Surface conditioning belts are commonly used in knife making to achieve an even, satin finish on blades. You’ll end up saving a lot of time over trying to hand sand a mirror finish. If you’re using surface conditioning belts for the first time, you’ll want to keep a few things in mind. First, you’ll want to use light to medium pressure with these belts. The coarse belts especially require light pressure. If you apply too much pressure, you’ll remove too much material too fast. You’ll also want to follow a proper grit sequence from coarse to medium to fine and super fine. What Can Surface Conditioning Belts Be Used On? Surface conditioning belts can be used on both airfile belt sanders and conventional belt sanders. Our 2 x 72 non-woven belts won’t fit any airfile sanders, but they will fit any conventional 2 x 72 sanders, including the Brodbeck Ironworks grinders, KMG Industrial Grinder, Reeder Grinders, Hardcore Belt Grinder, Wilton Square Wheel Grinder, and more. Why Buy 2 x 72 Inch Surface Conditioning Belts From Red Label? Red Label Abrasives is an American family-owned abrasive manufacturer. All of our belts are made in the US in Belding, MI. When you purchase Red Label belts, you’ll be supporting American families. Red Label also takes great pride in producing industrial-grade belts at affordable prices. You’ll be getting some of the best quality belts at some of the best prices online. As a family-owned manufacturer, we also work hard to offer the best customer service and support. If you have questions about our products, you’re not sure which belts would be best for your use case, or you’d like help troubleshooting a belt issue, our support team is here for you during office hours to answer all of your questions. 40+ Years of Industry Expertise Factory Direct Industrial Grade Abrasives FACTORY DIRECT INDUSTRIAL GRADE ABRASIVES FOR PRO RESULTS shop All categories shop All categories Knife Making Sanding Belts Work Sharp Compatible Belts Zirconia Sanding Belts Ceramic Sanding Belts Aluminum Oxide Sanding Belts Silicon Carbide Sanding Belts 3M Trizact Sanding Belts Surface Conditioning Belts 5" Sticky Sanding Discs 5" Hook and Loop Sanding Discs 6" Sticky Sanding Discs 6" Hook and Loop Discs Wet/Dry Film Discs Sanding Discs Adhesive Back Sanding Discs Home About red label abrasives Customer Feedback Contact seller --> × --> × --> × --> × --> × --> × --> 2 X 72 Inch Non-Woven Surface Conditioning Sanding Belts Product Features: Abrasive Material Aluminum Oxide Sanding Grade Coarse,Medium,Fine Application Grinding,Grinding/Sanding Material Steel, Metal, Aluminum Specialty Product Size 2 in x 72 in visit store Contact seller Fast & Free Shipping 60 Days Hassle Free Returns Best After Sales Support Family Owned Business Since 1985 Thousands of Happy Customers Premium Products from Best Materials Product Description Our premium-quality industrial-grade belts are long-lasting and produce a great finish for irregular steel, stainless steel, and aluminum surfaces. 2” x 72” Non-Woven Surface Conditioning Belt Product Details Available in 1 pack and 3 packs. Assorted grits pack contains 1 each of coarse, medium, and fine grit belts Resin bonded aluminum oxide grain evenly dispersed on open web nylon mesh fibers delivers consistent results Flexible, low stretch material with reinforced backing resists loading and heat build up for maximum belt life Grit Equivalents Of Our Surface Conditioning Belts Non-woven belts aren’t rated by grit, because there technically isn’t any grit on the belt. Nevertheless, you can expect certain surface conditioning belts to work similar to certain grit sizes. Below are the grit equivalents of our surface conditioning belts. Coarse (Brown) is equivalent to P120-P150 Medium (Maroon) is equivalent to P150-P180 Fine (Blue) is equivalent to P240-P280 Super Fine (Grey) is equivalent to P1000-P2000 What Are Surface Conditioning Belts & What Are They Uséd For? Non-woven belts and surface conditioning belts are terms uséd interchangeably that refer to the same type of belt. Surface conditioning or non-woven belts are uséd to deburr, clean, blend, and finish contours, edges on irregular aluminum, stainless steel, or steel surfaces. Surface conditioning belts are commonly uséd in knife making to achieve an even, satin finish on blades. You’ll end up saving a lot of time over trying to hand sand a mirror finish. If you’re using surface conditioning belts for the first time, you’ll want to keep a few things in mind. First, you’ll want to use light to medium pressure with these belts. The coarse belts especially require light pressure. If you apply too much pressure, you’ll remove too much material too fast. You’ll also want to follow a proper grit sequence from coarse to medium to fine and super fine. What Can Surface Conditioning Belts Be Uséd On? Surface conditioning belts can be uséd on both airfile belt sanders and conventional belt sanders. Our 2 x 72 non-woven belts won’t fit any airfile sanders, but they will fit any conventional 2 x 72 sanders, including the Brodbeck Ironworks grinders, KMG Industrial Grinder, Reeder Grinders, Hardcore Belt Grinder, Wilton Square Wheel Grinder, and more. Why Buy 2 x 72 Inch Surface Conditioning Belts From Red Label? Red Label Abrasives is an American family-owned abrasive manufacturer. All of our belts are made in the US in Belding, MI. When you purchase Red Label belts, you’ll be supporting American families. Red Label also takes great pride in producing industrial-grade belts at affordable prices. You’ll be getting some of the best quality belts at some of the best prices online. As a family-owned manufacturer, we also work hard to offer the best customer service and support. If you have questions about our products, you’re not sure which belts would be best for your use case, or you’d like help troubleshooting a belt issue, our support team is here for you during office hours to answer all of your questions. Our Customer Reviews Beginning the journey into knife making I wasn't sure what I wanted initially so I bought the knife maker 2x42 kit. I am absolutely impressed with the quality of the belts. They have improved my ability to grind a bevel and also dramatically lowered how long it take me to shape a blade. Beginning the journey into knife making I wasn't sure what I wanted initially so I bought the knife maker 2x42 kit. I am absolutely impressed with the quality of the belts. They have improved my ability to grind a bevel and also dramatically lowered how long it take me to shape a blade. Tyler B. My sander is about 80 years old and wasn't sure where to get sanding belts for it. I'm sure they will work out fine. Thanks a lot Richard H. Andrew answered the phone was extremely patient with me and took the time to explain belts and answer all of my questions. I was using another companies belts and called the wrong number. Andrew made the sale and I bought the aluminum oxide belts that go to higher grits with the x backing and I love them. Iâll be back for sure! Paul Paul M.. These belts do a great job and last a long time Todd S. I own a small knife sharpening business in NC and love the quality and length of life of Red Label Abrasives! Will always have my business! Cameron S. Totally love all Red Label Products! Couldnât have made this Champagne Sabre without them. Dotti A. Andrew helped me with the purchase of these buffers and explaind how to use them. He needs a raise! Paul M. Highly recommend Red Label, they had what we needed in stock and shipped quickly. Eric P. Using your discs for fine grit wet sanding on epoxy river tables. Work very well and seem to last 2X longer than other pads Iâve used. Very happy with them. William H. Such a great product! Fast shipping and great service! Jeff H. The 1 inch by 42 inch belts came quickly. The fine grit belt works perfectly to sharpen the expensive kitchen knives (German and French) and the Japanese knives. I will be ordering more in the future. Steve L. The Rhynowet sandpaper, in my first use, seems to be way better than standard AO sheets. And it's a full package - these should last me for a while! Josh B. Shop Our Product Range Ceramic Sanding Belts 5 x 10" 5 x 12" 1 x 30" 1 x 42" 2 x 36" 2 x 42" 2 x 48" 2 x 72" 3 x 21" 4 x 24" 4 x 36" 6 x 48" 6 x 89" Other Sizes Knife Making Sanding Belts 1 x 18" 1 x 30" 1 x 42" 2 x 36" 2 x 42" 2 x 48" 2 x 60" 2 x 72" 4 x 36" Silicon Carbide Sanding Belts 1 x 30" 1 x 42" 2 x 36" 2 x 42" 2 x 48" 2 x 72" All Other Sizes 3 x 18" 3 x 21" 4 x 24" 4 x 36" 6 x 48" 6 x 89" 3M Trizact Sanding Belts 2 x 42" 2 x 72" Surface Conditioning Belts 1 x 30" 2 x 42" 2 x 72" Zirconia Sanding Belts 5x12" 5 x 18" 1 x 30" 1 x 42" 2 x 36" 2 x 42" 2 x 48" 2 x 72" 3 x 21" 4 x 24" 4 x 36" 6 x 48" 6 x 89" All Other Sizes A DIVISION OF FINISHING TECHNOLOGIES, INC. For over 40 years, Finishing Technologies has been manufacturing premium sandpaper products from world class materials. We are proud to offer these products direct to consumers with our Red Label Abrasives Line. our categories Knife Making Sanding Belts Work Sharp Compatible Belts Zirconia Sanding Belts Ceramic Sanding Belts Aluminum Oxide Sanding Belts Silicon Carbide Sanding Belts 3M Trizact Sanding Belts Surface Conditioning Belts information links Home About Us Customer Feedback Contact Seller Save as Seller Please save our user id to get the latest updates and offers from Red Label Abrasives. Â© 2024 Red Label Abrasives. A Division of Finishing Technologies, Inc All Right Reserved. | Design by eStoreNinja.com eBay integration by

Price: 26.09 USD

Location: Belding, Michigan

End Time: 2024-12-28T11:59:15.000Z

Shipping Cost: 0 USD