2" 52mm 2 In 1 Car LCD Dual Gauge Fuel Level Gauge Voltmeter with Alram 9-32V

Description: 2" 52mm 2 In 1 Car LCD Dual Gauge Fuel Level Gauge Voltmeter with Alram 9-32V2" 52mm 2 In 1 Car LCD Dual Gauge Fuel Level Gauge Voltmeter with Alram 9-32V Gauge Connection: black line connect to the negative line, red line connect to the positive line, green line connect to the water level sensor signal line, white line connect to the sewage level sensor signal line, yellow line is exchange button line Feature:- 52mm diameter Two in One Gauge show with easy installation - Programmable Input Resistance Ohm Signal to adapt different fuel /water/temperature sensor 0-190Ω, 0-180Ω, 10-180Ω, 240-33Ω, 240-30Ω - High Resolution View under sunshine - Installation Diameter: 52mm (2inch) - Reverse polarity protection and anti-fogging performance - Working Voltage:12V/24V - Working temperatures: - 40 to 85°C - IP66 Waterproof - Water level gauge alarm set: less than 20% - Sewage level gauge alarm set: more than 80% INSTALLATION GUIDE 1. Cut an Φ52mm (2-1/16") hole in the panel (II) allow a clearance of 55mm (2 3/16”). behind the panel. 2. Remove fastening ring (I), insert gauge from front. Tighten gauge (III) using fastening ring ( I) 3. Connect cables according to the diagram/label. Setting Menu：“Unit” “R 1” “R 2”1.Hold & Press the button, Power On Gauge, the LED screen will show Switch Show Unit, R1, R2 2.Unit Fuel Gauge, Water Level, HTG Sewage Level: % Water temperature: ℃ or ℉ 3.R1---Configure Top Row Signal Range Press Button to switch 000 ~006 For example, LED will show 001, which means 0~180ohm, then release the button and wait digital flash to complete to save setting 4.R2---Configure Top Row Signal Range Press Button to switch 000 ~006. For example, LED will show “002” , which means 10~180ohm, then release the button and wait digital flash to complete to save setting Package Included: 1x 52mm gauge1x cable1x Instruction

Price: 35.89 AUD

Location: GZ

End Time: 2024-12-29T02:35:21.000Z

Shipping Cost: 0 AUD