1911 .45 acp Mil-Spec muzzle brake BLACK COMMANDER PREDATOR compensator

Description: Please Support American Machinists! Buy American! Barrel bushing style compensator for Commander (4.25”) barrel 1911 Autos. Fits Government (5”) barrel or Commander (4” or shorter). Model: Predator (curved ports) Finish: Black Oxide Barrel bushing compensator for Colt 1911/1911 clones Fits 4.25” Commander length 1911 Autos with a barrel OD between .577"-581". The bushing ID. Is .583" +-.0005". Fits calibers up to and including .45 acp. Can fit .38 and 9mm Minor fitting may be required Not compatible with bull barrels. This compensator is not threaded. Suppresses recoil by venting gasses at muzzle and adding weight to the end of your barrel. Adds approx. 1” length to your barrel and weighs 2.2 oz. CNC Machined Billet Hardened, Aerospace grade stainless steel What are the most common fitment issues I may encounter when installing an after market compensator?Some buyers may find that they need to modify the locking lug on the compensator because the fit is too tight. If you are comfortable making modifications yourself you can usually do so with either a dremel or fine grit sandpaper. If not we recommend consulting a gunsmith.If your stock spring plug is longer than 1.2" you will most likely either have to shorten your spring plug or use a Commander spring plug instead. Installation: Start with the barrel and guide rod installed in the slide Insert spring and then insert spring cap. Depress the spring cap with thumb. With spring cap depressed, insert compensator and twist into place. Removal: Insert the back side of a 3/8” drill bit or dowel pin with a diameter of .399" to depress spring cap. Twist compensator counterclockwise to the 4 o’clock position Remove compensator. It is YOUR responsibility to be absolutely certain that all parts are installed and fitted correctly. Firearms are complicated mechanisms and improper installation and/or fitment can result in dangerous malfunctioning, damage to the firearm and serious injury to the shooter and other persons. The purchaser/installer of parts must accept full responsibility for the correct adjustments and functioning of the firearm after such installation. The purchaser takes full responsibility for any misuse, abuse, neglect, modification(s), improper installation, improper use, or improper handling. Satisfaction is guaranteed! If you don't like the item simply send it back and unmodified and I will refund you 100%!

Price: 39.99 USD

Location: Riverside, California

End Time: 2024-02-18T17:59:48.000Z

Shipping Cost: 0 USD