12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive

Description: 12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive 12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info: An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. ---Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools. ---Operating temperature: -10° F to 150° F. ---Storage temperature: -20° F to 200° F. ---Engineered for durability. ---Breakers include nuts and washers. 12 volt 20 Amp DC Auto Reset Circuit Breaker Type 1 for Wind, Solar, Automotive 12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers. Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! 12Volt 20Amp DC Auto Reset Circuit Breaker Type 1 You are bidding on one 12V 20A DC Auto Reset Circuit Breaker (Single Pole Thermal Type 1 Breaker) This product is designed to allow a current under 20 Amps to flow to keep wind turbine generators from burning out. An electric current in excess of 20 Amps will overheat the breaker causing the fuse to auto disconnect stopping the currents flow. When the current drops under 20 Amps the breaker will cool and electricity will start to flow again as the continuity is restored. Additional Info:An auto-reset automotive circuit breaker provides continuous operation during an overcurrent condition, specifically for DC applications. A 12V circuit breaker will continue to recycle until the source of overcurrent is found and then corrected. These 12v circuit breakers are single pole and stud mount. When a 12 volt circuit breaker had these characteristics, it is referred to as a type 1 circuit breaker. It can be used in a variety of applications including wind and solar but not limited to automotive, trucks and buses. Constructed with internal composite alloy material to deflect and separate the contacts when an overcurrent situation occurs and return to the run mode as it cools.Operating temperature: -10° F to 150° F.Storage temperature: -20° F to 200° F.Engineered for durability.Breakers include nuts and washers.

Price: 8.09 USD

Location: Roanoke, Virginia

End Time: 2024-07-16T15:16:33.000Z

Shipping Cost: 0 USD