10M GPIO Logic Level Converter Board PWM Signal Optical Isolation Module PNP NPN

Description: Features This is a 2-channel high-speed photoelectric isolation module with a maximum transmission rate of up to 10MBit/s and input and output isolation of 5000Vrms. There are four wiring methods, non-inverting input, inverting input, differential in-phase input, and differential inverting input. Can be used in most 3.3V 5V level isolation situations. Input level : 3.3-5V Output level: 3.3-5V Input drive current: 3.3V/4MA; 5V/7MA Output load current: 3.3V/5MA; 5V/8MA Input signal type: NPN/PNP Output signal type: NPN Isolation voltage: 5000V Signal frequency: <10Mhz Product model: OP62A02 Brand name: eletechsup Working temperature: -40-110 degrees Celsius Conversion type: NPN to NPN; PNP to NPN Size: 35.5*22*5.7MM(No terminal),35.5*22*12MM(With terminal) Weight: 3.1grams(No terminal),6.5grams(With terminal) Application: 3.3V LvTTL 5V TTL Convert each other for Arduino MEGA2560 ESP32 etc. Line receiver,data transmission Data multiplexing Switching power supplies Pulse transformer replacement Pin Description: IN1+:Signal Input 1+ IN1- :Signal Input 1- IN2+:Signal Input 2+ IN2- :Signal Input 2- VCC: Output Working Power+（DC 3-5.5V） GND: Output Working Power- O1: Signal Output 1 O2: Signal Output 2 There are three wiring methods. The input drive requires a current of more than 8MA. If you are not sure about the drive current of the input device, it is recommended to use the first wiring method.

Price: 5.98 USD

Location: Guangzhou

End Time: 2024-12-19T06:47:31.000Z

Shipping Cost: 3.99 USD