10 Bolt Differential for Sierra Yukon 8.6 Limited Slip Posi 30 Spline 542097

Description: 10 Bolt Differential for Sierra Yukon 8.6 Limited Slip Posi 30 Spline 54209710 Bolt Differential for Sierra Yukon 8.6 Limited Slip Posi 30 Spline 542097 Free Shipping to US One Year Warranty Condition: 100% brand new Part Number:19559-010,19559010 542022,542097,GM10-LS30,201030-MG 998.GM10C,GM86PGBK-30-373,YDGGM8.5-3-30-1 New GM 8.6" Posi Unit - 30 Spline w/ Carrier Bearings/Races Eaton-Style (clutch) Posi Unit Fits 2.73 & Numerically Higher Gear Ratios (3.08, 3.42, 3.73, 4.11, 4.56, etc) Nodular Iron Casing Heavy Duty Composite Clutches, 400lb Springs & Forged 4130 Internals Includes (2) Carrier Bearings & (2) Carrier Bearing Races Fits 1999 and Newer Chevy 1500 Applications Fit For Cadillac Escalade (1999 - 2008) Chevrolet / Chevy Avalanche 1500 (2002 - 2008) - Only with 8.6" 10 Bolt Rear Diff Chevrolet / Chevy S10 Blazer / Pickup (2000 - 2005) Chevrolet / Chevy Silverado 1500 1/2 Ton (2000 - 2008) Chevrolet / Chevy Silverado HD 1500 1/2 Ton (2001 - 2008) Chevrolet / Chevy SSR (2003 - 2006) Chevrolet / Chevy Suburban 1/2 Ton (2000 - 2008) Chevrolet / Chevy Tahoe 1500 1/2 Ton (2000 - 2008) Chevrolet / Chevy Trailblazer (2000 - 2012) GMC Canyon (2004 - 2008) - Only with 8.6" 10 Bolt Rear Diff GMC Envoy (2002 - 2008) - Only with 8.6" 10 Bolt Rear Diff GMC S15 Jimmy / Pickup (2000 - 2005) GMC Savana 1500 1/2 Ton (2000 - 2008) GMC Savana 2500 3/4 Ton (2000 - 2008) Only with 8.6" 10 Bolt Rear Diff GMC Sierra 1500 1/2 Ton (2000 - 2008) GMC Sierra 1500 HD 1/2 Ton (2000 - 2008) GMC Sierra Denali (2000 - 2008) GMC Sonoma (2000 - 2004) GMC Suburban 1/2 Ton (2000 -2008) GMC Yukon 1500 1/2 Ton (2000 - 2008) GMC Yukon XL 1500 1/2 Ton (2000 - 2008) Hummer H3 (2005 - 2008) Isuzu Ascender (2003 - 2008) * The 8.5″ axle was used on vehicles up to 1999. The 8.6″ was used on vehicles 1999 and up. Since 1999 was the transition year, some vehicles received the 8.5″ while others received the 8.6″. The easiest way to tell the difference is by looking at the brakes. All 8.6″ axles have disc brakes and 8.5″ have drums. * The factory 8.5″ carrier when installed in a factory 8.5″ axle uses Timken bearing part # LM501349 and race part # LM501314. The inner diameter of the bearing is about 1.625″ and the outer diameter of the race is about 2.890″. * The factory 8.6″ carrier when installed in a factory 8.6″ axle uses Timken bearing part # LM603049 and race part # LM603012. The inner diameter of the bearing is about 1.780″ and the outer diameter of the race is about 3.060″. * Nowadays, most locker manufacturers produce parts only for the 8.6″ and include properly sized bearings to retrofit them into the older 8.5″ axles. Therefore, the inner diameter of the bearings for these parts will be about 1.780″ and the outer diameter of the race will be about 2.890″. This same logic also applies to differential carriers, but it is important to note that the parts are BACKWARD compatible only. That’s to say that the newer 8.6″ differential cases when used with the appropriate sized bearings and races can install into older 8.5″ axles. As of this writing, there are no bearing and race combinations that allow an 8.5″ carrier or locker to install into an 8.6″ axle. When retrofitting an 8.6″ carrier (or a locker or a spool or any device that replaces the carrier) into an 8.5″ axle, it uses Timken bearing part # LM102949 and race part # LM102911. 1 Year Warranty:This item have 1-year warranty.In the event the item should fail due to manufacturing defects during intended use, we will replace the part by free.We only warranty cost of item parts. Any installation or other fees are non-refundable.Note: Any modifying the item of any kind without contacting us will avoid any and all warranty coverage for this item.Please contact us before modifying the part so that we have the opportunity to correct the situation.You can contact us by eBay message to get the full text of the written warranty. WARNING:Some product can expose you to chemicals including Chromium (Hexavalent Compounds),which is known to the State of California to cause cancer, and birth defects or other reproductive harm.For more information, go to California government website, you can search California P65Warnings PaymentDelivery detailsTerms of salesReturn policyAbout usPaymentWe only accept payments by PayPal.Please make payment within 3 days after winning the auction.Non-payment will lead to unpaid strike file to eBay.Delivery detailsArrival time for the USA buyers: about 1-6 business days.Arrival time for Canada buyers: about 3-10 business days.Package is sent to buyer's Paypal Confirmed Address.We ship worldwide, international buyers are welcome!Terms of salesThe shipping includes shipping cost & handling cost. They are non-refundable.Most of the items are after-market, so, no installation instruction will be included.Return policyBuyers pay the return shipping cost in case for exchange or refund.For replacements, please notice us within 5 days after you receiving the item.About usWe will try our best to serve you better! Please email us freely if you have any questions.Negative feedback won't help! Please contact us first to solve the problem before leaving negative feedback.Brandcarmorecar2017TypeDifferentialManufacturer Part Number19559-010, 542022, 542097, GM10-LS30, 998.GM10COE/OEM Part Number19559-010;19559010Interchange Part Number19559-010, 542022, 542097, GM10-LS30, 998.GM10C, GM86PGBK-30-373, YDGGM8.5-3-30-1, 201030-MGSuperseded Part Number483-59010-CMCManufacturer Warranty1 YearItems IncludedBAVintage PartNoUniversal FitmentNoPerformance PartNoCountry/Region of ManufactureChina

Price: 175.97 USD

Location: Ontario, California

End Time: 2025-01-04T09:23:03.000Z

Shipping Cost: 0 USD